101692-3302 ZEXEL 9 400 616 031 BOSCH INJECTION-PUMP ASSEMBLY 9400616031 1016923302 6207711280


101692-3302 INJECTION-PUMP ASSEMBLY
Rating:
73
Buy INJECTION-PUMP ASSEMBLY 101692-3302 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 031 9400616031
ZEXEL 101692-3302 1016923302
KOMATSU 6207711280 6207711280

Service parts 101692-3302 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-9210
3. GOVERNOR 105400-3301
4. SUPPLY PUMP 105220-5280
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4110
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105048-3060
14. NOZZLE 105017-0090
15. NOZZLE SET

Include in #1:

101692-3302 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 031 9400616031
ZEXEL 101692-3302 1016923302
KOMATSU 6207711280 6207711280


Zexel num
Bosch num
Firm num
Name
101692-3302 
101692-3980 
9 400 616 031 
6207711280  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D95L K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Rack position
Point A
  R=A
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.8
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   42.5 41.5 43.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   10.4+-0. 5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   12.5 11.5 13.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101692-3302
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1 (3)Rack difference between N = N1 and N = N2
----------
K=5 R1=(17.5)mm N1=1100r/min N2=700r/min
----------

Speed control lever angle

Test data 101692-3302
F:Full speed I:Idle S:Stop
----------

----------
a=9deg+-5deg b=32deg+-3deg c=33deg+-5deg

Timing setting

Test data 101692-3302
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)- (5)-
----------

----------
a=59deg36min+-3deg b=0deg24min+-30min




Have questions with 101692-3302?





Group cross 101692-3302 ZEXEL

Komatsu 

101692-3302  

101692-3980 
9 400 616 031 
6207711280 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 032 
 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 033 
6206711332 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 034 
6207711332 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 
INJECTION-PUMP ASSEMBLY
6D95L
 
 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 616 035 
6207711120 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 
INJECTION-PUMP ASSEMBLY
S6D95L
 
 
INJECTION-PUMP ASSEMBLY
S6D95L
Back to top