101692-2720 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016922720 220201212a


101692-2720 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101692-2720 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101692-2720 1016922720
HINO 220201212A 220201212a

Service parts 101692-2720 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-2010
3. GOVERNOR 105400-1960
4. SUPPLY PUMP 105210-4161
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0220
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE 105000-1310
15. NOZZLE SET

Include in #1:

101692-2720 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101692-2720 1016922720
HINO 220201212A 220201212a


Zexel num
Bosch num
Firm num
Name
101692-2720 
101692-2722 
 
220201212A  HINO
INJECTION-PUMP ASSEMBLY
DK10 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.1 2.05 2.15
Rack position
After adjusting injection quantity.
  R=A
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.2
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   120.1 117.6 122.6
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   D
Rack position   6.1+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   13.2 10.7 15.7
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101692-2720
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK CAP: R1
----------
K=17 R1=(17.5)mm
----------

Speed control lever angle

Test data 101692-2720
F:Full speed I:Idle S:Stop (1)Speed set at aa (setting at shipping) (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=15.5deg+-5deg b=32deg+-3deg c=40deg+-5deg d=10deg+-5deg

Stop lever angle

Test data 101692-2720
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg




Have questions with 101692-2720?





Group cross 101692-2720 ZEXEL

Hino 

 
220201330A 
INJECTION-PUMP ASSEMBLY
DK10T
9 400 616 020 
220201331A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201340A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201341A 
INJECTION-PUMP ASSEMBLY
DK10T
101692-2720  

101692-2722 
 
220201212A 
INJECTION-PUMP ASSEMBLY
DK10
 
220201213A 
INJECTION-PUMP ASSEMBLY
DK10
 
220202520A 
INJECTION-PUMP ASSEMBLY
DK10
 
220201610A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201611A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201750A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201751A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201740A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201741A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201930A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220201970A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220202640A 
INJECTION-PUMP ASSEMBLY
DK10T
 
220202650A 
INJECTION-PUMP ASSEMBLY
DK10
Back to top