101692-2550 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016922550 220201440a


101692-2550 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 101692-2550 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101692-2550 1016922550
HINO 220201440A 220201440a

Service parts 101692-2550 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-0850
3. GOVERNOR 105402-1400
4. SUPPLY PUMP 105210-4161
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0220
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE 105000-1310
15. NOZZLE SET

Include in #1:

101692-2550 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101692-2550 1016922550
HINO 220201440A 220201440a


Zexel num
Bosch num
Firm num
Name
101692-2550 
101692-2551 
 
220201440A  HINO
INJECTION-PUMP ASSEMBLY
EB100 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.1 2.05 2.15
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.2
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   99.1 97.1 101.1
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.9
Pump speed r/min   825 825 825
Average injection quantity mm3/st.   88 86 90
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.5+-0. 5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   94 92 96
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   7+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   16.6 14 19.2
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101692-2550
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)The torque control spring does not operate. (3)Idle sub spring setting: L1.
----------
K=15 L1=7-0.5mm
----------

Speed control lever angle

Test data 101692-2550
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=8deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 101692-2550
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg




Have questions with 101692-2550?





Group cross 101692-2550 ZEXEL

Hino 

 
6061110210 
INJECTION-PUMP ASSEMBLY
DK10
 
220202190A 
INJECTION-PUMP ASSEMBLY
DK10
 
6061113610 
INJECTION-PUMP ASSEMBLY
DK10
 
220201220A 
INJECTION-PUMP ASSEMBLY
DK10T
 
6061113110 

9 400 610 102 
6061113111 
INJECTION-PUMP ASSEMBLY
DK10AT
101692-2550  

101692-2551 
 
220201440A 
INJECTION-PUMP ASSEMBLY
EB100
 
220201441A 
INJECTION-PUMP ASSEMBLY
EB100
 
6071110690 

 
220200004A 

DK10
Back to top