101691-9390 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016919390 16717z5502


101691-9390 INJECTION-PUMP ASSEMBLY
Rating:
80
Buy INJECTION-PUMP ASSEMBLY 101691-9390 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101691-9390 1016919390
NISSAN-DIESEL 16717Z5502 16717z5502

Cross reference number

ZEXEL 101691-9390 1016919390
NISSAN-DIESEL 16717Z5502 16717z5502


Zexel num
Bosch num
Firm num
Name
101691-9390 
101602-9450 
 
16717Z5502  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FD605 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.4 2.35 2.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.3
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   43.9 42.9 44.9
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   40 38.5 41.5
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   12.1 11 13.2
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   700--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   650
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   1.6 1.1 2.1
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   6 6 6
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101691-9390
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Rack difference between N = N1 and N = N2 (4)Idle sub spring setting: L1. (5)Solenoid operation confirmation: Set the speed control lever in the full speed position. At pump speed N3 when the solenoid is operated, confirm that the rack position is R1 or less.
----------
K=17 RAL=14.4+-0.1mm N1=480r/min N2=750r/min L1=6.4-0.5mm N3=100r/min R1=-1mm
----------

Speed control lever angle

Test data 101691-9390
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Stopper bolt setting (3)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=10deg+-5deg b=23deg+-5deg c=6deg+-5deg

Stop lever angle

Test data 101691-9390
N:Pump normal S:Stop the pump.
----------

----------
a=(25deg) b=(40deg)

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101691-9390
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=B a2=- r1=750r/min r2=- Q1=43.9+-1mm3/st Q2=- c1=+-2.5% c2=- a3=18 a4=15 r3=900r/min r4=750r/min

Timing setting

Test data 101691-9390
(1)Pump vertical direction (2)Position of gear mark 'P' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 101691-9390?





Group cross 101691-9390 ZEXEL

Nissan-Diesel 

 
16713Z5563 
INJECTION-PUMP ASSEMBLY
FD6
 
16790Z5515 
INJECTION-PUMP ASSEMBLY
FD6
 
16700Z5571 
INJECTION-PUMP ASSEMBLY
FD6
 
16700Z5577 
INJECTION-PUMP ASSEMBLY
FD6
9 400 616 005 
16700Z5601 
INJECTION-PUMP ASSEMBLY
FD6
9 400 616 006 
16700Z5576 
INJECTION-PUMP ASSEMBLY
FD6
 
16700Z5578 
INJECTION-PUMP ASSEMBLY
FD6
 
16700Z5600 
INJECTION-PUMP ASSEMBLY
FD6
 
16713Z5566 
INJECTION-PUMP ASSEMBLY
FD6
101691-9390  

101602-9450 
 
16717Z5502 
INJECTION-PUMP ASSEMBLY
FD605
Back to top