101691-6190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016916190


101691-6190 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 101691-6190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101691-6190 1016916190

Service parts 101691-6190 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-9500
3. GOVERNOR 105402-2370
4. SUPPLY PUMP 105220-5150
5. AUTOM. ADVANCE MECHANIS 105676-0730
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4862
11. Nozzle and Holder ME080371
12. Open Pre:MPa(Kqf/cm2) 17.7(180)
13. NOZZLE-HOLDER 105048-3501
14. NOZZLE 105017-0850
15. NOZZLE SET

Include in #1:

101691-6190 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101691-6190 1016916190


Zexel num
Bosch num
Firm num
Name
101691-6190 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   69.8 68.8 70.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.4+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   66 66 71
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1100++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1100.
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   3 3 3
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101691-6190
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Supplied with torque spring not set. (3)RACK LIMIT (4)Set at delivery (5)Rack difference between N = N1 and N = N2 (6)Main spring setting (7)Set idle sub-spring
----------
K=10 N1=1000r/min N2=650r/min
----------

Speed control lever angle

Test data 101691-6190
F:Full speed I:Idle (1)Stopper bolt setting (2)At delivery
----------

----------
a=8deg+-5deg b=24deg+-5deg c=(2deg)

Stop lever angle

Test data 101691-6190
N:Pump normal S:Stop the pump. (1)At delivery
----------

----------
a=43deg+-5deg b=53deg+-5deg

Timing setting

Test data 101691-6190
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101691-6190?





Group cross 101691-6190 ZEXEL

Mitsubishi 

9 400 615 989 
ME088471 
INJECTION-PUMP ASSEMBLY
6D31T
9 400 615 990 
ME088500 
INJECTION-PUMP ASSEMBLY
6D31T
9 400 610 272 
ME088503 
INJECTION-PUMP ASSEMBLY
6D31T
F 01G 09U 06G 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 991 
ME088512 
INJECTION-PUMP ASSEMBLY
6D31T
9 400 615 992 
ME088600 
INJECTION-PUMP ASSEMBLY
6D31T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 184 
ME088632 
INJECTION-PUMP ASSEMBLY
6D31T
9 400 615 993 
ME088182 
INJECTION-PUMP ASSEMBLY
6D31T
F 019 Z10 510 
ME088688 
INJECTION-PUMP ASSEMBLY
6D31T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 786 
ME088712 
INJECTION-PUMP ASSEMBLY
6D31T
101691-6190  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 329 
ME088710 
INJECTION-PUMP ASSEMBLY
6D31T
Back to top