101691-6060 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016916060 me088388

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101691-6060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101691-6060 1016916060

MITSUBISHI ME088388 me088388

Service parts 101691-6060 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101069-9340

3. GOVERNOR 105480-0750

4. SUPPLY PUMP 105220-5150

5. AUTOM. ADVANCE MECHANIS 105614-2010

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-4120

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105048-3070

14. NOZZLE

105017-0100

15. NOZZLE SET

Include in #1:

101691-6060 as INJECTION-PUMP ASSEMBLY

Include in #2:

104745-8090 as _

104745-8091

Cross reference number

ZEXEL 101691-6060 1016916060

MITSUBISHI ME088388 me088388

Zexel num

Bosch num

Firm num

Name

101691-6060
101691-6140

ME088388 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D31T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 7.8

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 76 75 77

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.2+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 9.5 8 11

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Timer adjustment

Pump speed r/min 1250--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1200

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 1 0.5 1.5

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 3 3 3

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Excess fuel setting for starting: SXL (4)Damper spring setting: DL (5)Variable speed specification: idling adjustment (6)After setting damper. (7)Main spring setting (8)Set idle sub-spring
----------
RT=1 TH=2.4mm SXL=8.1+-0.1mm DL=6.2-0.2mm
----------

Speed control lever angle

F:Full speed I:Idle
----------

----------
a=21deg+-5deg b=(15deg)+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=2deg+-5deg b=15deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=71deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(4deg)