Fuel injectors
  1. Home
  2. injection
  3. #1016900561

101690-0561 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016900561 1156006731


101690-0561 INJECTION-PUMP ASSEMBLY
Rating:
75
Buy INJECTION-PUMP ASSEMBLY 101690-0561 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101690-0561 1016900561
ISUZU 1156006731 1156006731

Service parts 101690-0561 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-3210
3. GOVERNOR 105410-4530
4. SUPPLY PUMP 105210-4251
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0350
7. COUPLING PLATE 156612-1420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-2010
11. Nozzle and Holder 9-15300-184-2
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105031-2600
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101690-0561 as INJECTION-PUMP ASSEMBLY

Include in #2:

104745-3510 as _

Cross reference number

ZEXEL 101690-0561 1016900561
ISUZU 1156006731 1156006731


Zexel num
Bosch num
Firm num
Name
101690-0561 
 
1156006731  ISUZU
INJECTION-PUMP ASSEMBLY
DH100 * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.4
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   111.2 108.8 113.6
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   92 88.9 95.1
Max. variation between cylinders %   0 -3 3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.9+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   9 6.7 11.3
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101690-0561
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)At rack cap installation: R1
----------
K=10 R1=(17.5)mm
----------

Speed control lever angle

Test data 101690-0561
F:Full speed I:Idle S:Stop
----------

----------
a=2deg+-5deg b=31deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 101690-0561
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg




Have questions with 101690-0561?





Group cross 101690-0561 ZEXEL

Isuzu 

101690-0551  
 
1156007421 
INJECTION-PUMP ASSEMBLY
DH100
101690-0561  
 
1156006731 
INJECTION-PUMP ASSEMBLY
DH100
101690-0570  
 
9812010231 

DH100
101690-0580  
 
1156002241 
INJECTION-PUMP ASSEMBLY
DH100
101690-0590  
 
9812010241 
INJECTION-PUMP ASSEMBLY
DH100T
Back to top