Fuel injectors
  1. Home
  2. injection
  3. #1016900420

101690-0420 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016900420 9812010261


101690-0420 INJECTION-PUMP ASSEMBLY
Rating:
67
Buy INJECTION-PUMP ASSEMBLY 101690-0420 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101690-0420 1016900420
ISUZU 9812010261 9812010261

Cross reference number

ZEXEL 101690-0420 1016900420
ISUZU 9812010261 9812010261


Zexel num
Bosch num
Firm num
Name
101690-0420 
101690-0450 
 
9812010261  ISUZU
INJECTION-PUMP ASSEMBLY
DH100 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105780-0020
Bosch type code   DN4SD24T
Nozzle holder   105031-2480
Opening pressure MPa   9.8
Opening pressure kgf/cm2   100
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.4
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   122 119.6 124.4
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   104 100.9 107.1
Max. variation between cylinders %   0 -3 3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.9+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   17.5 15.2 19.8
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101690-0420
N:Pump speed R:Rack position (mm) (1)At rack cap installation: R1
----------
R1=(17.5)mm
----------

Speed control lever angle

Test data 101690-0420
F:Full speed S:Stop (1)Beginning of speed increase
----------

----------
a=29deg+-5deg b=2deg+-5deg c=32deg+-3deg




Have questions with 101690-0420?





Group cross 101690-0420 ZEXEL

Isuzu 

101690-0400  

101690-0650 
 
9812010800 

101690-0410  

101690-0600 
 
 
INJECTION-PUMP ASSEMBLY
DH100T
101690-0420  

101690-0450 
 
9812010261 
INJECTION-PUMP ASSEMBLY
DH100
101690-0430  

101690-0580 
 
1156002240 

101690-0440  
9 400 610 182 
9812010212 
INJECTION-PUMP ASSEMBLY
DH100
101690-0450  
 
9812010264 
INJECTION-PUMP ASSEMBLY
101690-0460  

101690-0570 
 
9812010232 

101690-0490  

101690-0600 
 
9812010252 

Back to top