Fuel injectors
  1. Home
  2. injection
  3. #1016850190

101685-0190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016850190 9812009211


101685-0190 INJECTION-PUMP ASSEMBLY
Rating:
58
Buy INJECTION-PUMP ASSEMBLY 101685-0190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101685-0190 1016850190
ISUZU 9812009211 9812009211

Service parts 101685-0190 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101068-3610
3. GOVERNOR 105542-6300
4. SUPPLY PUMP 105210-4251
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-3230
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-2010
11. Nozzle and Holder 9-15300-184-2
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105031-2600
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101685-0190 as INJECTION-PUMP ASSEMBLY

Include in #2:

104745-3290 as _

Cross reference number

ZEXEL 101685-0190 1016850190
ISUZU 9812009211 9812009211


Zexel num
Bosch num
Firm num
Name
101685-0190 
 
9812009211  ISUZU
INJECTION-PUMP ASSEMBLY
DA640 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   65 63.5 66.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   65.3 63.1 67.5
Max. variation between cylinders %   0 -3 3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   41 39 43
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   10+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11 8.7 13.3
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101685-0190
N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1
----------

----------




Have questions with 101685-0190?





Group cross 101685-0190 ZEXEL

Isuzu 

101685-0110  

101685-0410 
 
1156003280 

101685-0120  

101685-0250 
 
1156003890 

101685-0130  
 
1156000843 
INJECTION-PUMP ASSEMBLY
DA640
101685-0140  
 
1156000853 
INJECTION-PUMP ASSEMBLY
DA640
101685-0150  
 
1156000432 

DA640
101685-0160  
 
1156000443 
INJECTION-PUMP ASSEMBLY
DA640
101685-0170  
 
1156000423 
INJECTION-PUMP ASSEMBLY
DA640
101685-0180  

101685-0530 
 
1156004420 

101685-0190  
 
9812009211 
INJECTION-PUMP ASSEMBLY
DA640
Back to top