Fuel injectors
  1. Home
  2. injection
  3. #1016828460

101682-8460 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016828460 1156000361


101682-8460 INJECTION-PUMP ASSEMBLY
Rating:
73
Buy INJECTION-PUMP ASSEMBLY 101682-8460 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101682-8460 1016828460
ISUZU 1156000361 1156000361

Service parts 101682-8460 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP
3. GOVERNOR 105510-8400
4. SUPPLY PUMP
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-3132
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-2010
11. Nozzle and Holder 9-15300-184-2
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105031-2600
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101682-8460 as INJECTION-PUMP ASSEMBLY

Include in #2:

104745-3611 as _
104745-3612

Cross reference number

ZEXEL 101682-8460 1016828460
ISUZU 1156000361 1156000361


Zexel num
Bosch num
Firm num
Name
101682-8460 
101685-0570 
 
1156000361  ISUZU
INJECTION-PUMP ASSEMBLY
DA120 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle holder   105031-2480
Bosch type code   KB69SD273NP6
Opening pressure MPa   9.8
Opening pressure kgf/cm2   100
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   70 68.6 71.4
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   72.5 70.3 74.7
Max. variation between cylinders %   0 -3 3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   46.7 44.8 48.6
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   10+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   17.5 15.2 19.8
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101682-8460
R:Rack position (mm) P:Negative pressure (1)Torque control stroke
----------

----------




Have questions with 101682-8460?





Group cross 101682-8460 ZEXEL

Isuzu 

101682-8400  

101685-0600 
 
1156000301 
INJECTION-PUMP ASSEMBLY
DA120
101682-8410  

101685-0630 
 
1156000310 

101682-8420  

101685-0610 
 
1156000321 
INJECTION-PUMP ASSEMBLY
DA120
101682-8430  

101685-0640 
 
1156000331 
INJECTION-PUMP ASSEMBLY
DA120
101682-8440  

101685-0590 
 
1156000341 

101682-8450  

101685-0650 
 
1156000351 

DA120
101682-8460  

101685-0570 
 
1156000361 
INJECTION-PUMP ASSEMBLY
DA120
101682-8470  

101685-0670 
 
1156000371 
INJECTION-PUMP ASSEMBLY
DA120
101682-8480  

101685-0690 
 
1156000381 

101682-8490  

101685-0200 
 
1156000391 
INJECTION-PUMP ASSEMBLY
DA640
Back to top