Fuel injectors
  1. Home
  2. injection
  3. #1016721180

101672-1180 ZEXEL 9 400 610 782 BOSCH INJECTION-PUMP ASSEMBLY 9400610782 1016721180 3006142010


101672-1180 INJECTION-PUMP ASSEMBLY
Rating:
45
Buy INJECTION-PUMP ASSEMBLY 101672-1180 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 782 9400610782
ZEXEL 101672-1180 1016721180
MITSUBISHI 3006142010 3006142010

Service parts 101672-1180 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101067-1460
3. GOVERNOR 105400-0510
4. SUPPLY PUMP 105210-3160
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0200
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1390
11. Nozzle and Holder ME046001
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-2150
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101672-1180 as INJECTION-PUMP ASSEMBLY

Include in #2:

104740-8570 as _

Cross reference number

BOSCH 9 400 610 782 9400610782
ZEXEL 101672-1180 1016721180
MITSUBISHI 3006142010 3006142010


Zexel num
Bosch num
Firm num
Name
101672-1180 
101672-1310 
9 400 610 782 
3006142010  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6DB10 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105780-0020
Bosch type code   DN4SD24T
Nozzle holder   105031-2010
Bosch type code   KB56SD273
Opening pressure MPa   11.8
Opening pressure kgf/cm2   120
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-1.6-550
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   88 86.5 89.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7
Pump speed r/min   200 200 200
Average injection quantity mm3/st.   17.5 15 20
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101672-1180
N:Pump speed R:Rack position (mm)
----------

----------

Speed control lever angle

Test data 101672-1180
F:Full speed I:Idle S:Stop
----------

----------
a=(6deg) b=32deg+-3deg c=(25deg)

Stop lever angle

Test data 101672-1180
F:Full speed I:Idle S:Stop
----------

----------
a=(6deg) b=32deg+-3deg c=(25deg)

Timing setting

Test data 101672-1180
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(140deg)




Have questions with 101672-1180?





Group cross 101672-1180 ZEXEL

Mitsubishi 

101672-1100  

101672-1350 
 
3006118800 

101672-1140  
 
3006139010 

101672-1180  

101672-1310 
9 400 610 782 
3006142010 
INJECTION-PUMP ASSEMBLY
6DB10
101672-1190  

101672-1350 
 
3006118801 
INJECTION-PUMP ASSEMBLY
6DB10
Back to top