101672-0170 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016720170 5156003806


101672-0170 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 101672-0170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101672-0170 1016720170
ISUZU 5156003806 5156003806

Service parts 101672-0170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101067-8110
3. GOVERNOR 105410-2510
4. SUPPLY PUMP 105220-4531
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156612-1121
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-1190
11. Nozzle and Holder 5-15300-097-0
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105041-1100
14. NOZZLE 105000-1650
15. NOZZLE SET

Include in #1:

101672-0170 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101672-0170 1016720170
ISUZU 5156003806 5156003806


Zexel num
Bosch num
Firm num
Name
101672-0170 
 
5156003806  ISUZU
INJECTION-PUMP ASSEMBLY
D500 * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   44 43 45
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   47 44.8 49.2
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.4+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   8.6 7.1 10.1
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101672-0170
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set the torque control spring so that the injection quantity passes through point B.
----------
K=10
----------

Speed control lever angle

Test data 101672-0170
F:Full speed I:Idle S:Stop
----------

----------
a=10deg+-5deg b=24deg+-5deg c=32deg+-3deg




Have questions with 101672-0170?





Group cross 101672-0170 ZEXEL

Isuzu 

 
9812021447 
INJECTION-PUMP ASSEMBLY
D500
 
5156001096 
INJECTION-PUMP ASSEMBLY
D500
101672-0170  
 
5156003806 
INJECTION-PUMP ASSEMBLY
D500
 
9812022012 
INJECTION-PUMP ASSEMBLY
D500
 
5156010664 
INJECTION-PUMP ASSEMBLY
D500
Back to top