Fuel injectors
  1. Home
  2. injection
  3. #1016720100

101672-0100 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016720100 9812021447


101672-0100 INJECTION-PUMP ASSEMBLY
Rating:
32
Buy INJECTION-PUMP ASSEMBLY 101672-0100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101672-0100 1016720100
ISUZU 9812021447 9812021447

Cross reference number

ZEXEL 101672-0100 1016720100
ISUZU 9812021447 9812021447


Zexel num
Bosch num
Firm num
Name
101672-0100 
 
9812021447  ISUZU
INJECTION-PUMP ASSEMBLY
D500 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.6
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   55.7 53.3 58.1
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.6
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   52.8 51.6 54
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.4+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   8.6 7.1 10.1
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101672-0100
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)The torque control spring does not operate.
----------
K=18
----------

Speed control lever angle

Test data 101672-0100
F:Full speed I:Idle S:Stop
----------

----------
a=12deg+-5deg b=22deg+-5deg c=32deg+-3deg




Have questions with 101672-0100?





Group cross 101672-0100 ZEXEL

Isuzu 

101672-0100  
 
9812021447 
INJECTION-PUMP ASSEMBLY
D500
101672-0150  
 
5156001096 
INJECTION-PUMP ASSEMBLY
D500
101672-0170  
 
5156003806 
INJECTION-PUMP ASSEMBLY
D500
101672-0180  
 
9812022012 
INJECTION-PUMP ASSEMBLY
D500
101672-0190  
 
5156010664 
INJECTION-PUMP ASSEMBLY
D500
Back to top