Fuel injectors
  1. Home
  2. injection
  3. #1016719840

101671-9840 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016719840


101671-9840 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 101671-9840 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101671-9840 1016719840

Cross reference number

ZEXEL 101671-9840 1016719840


Zexel num
Bosch num
Firm num
Name
101671-9840 
101671-9841 
 
  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
ND6 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.5 2.45 2.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   64.7 63.3 66.1
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   12.5
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   58.3 55.7 60.9
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.2+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   8.3 7.1 9.5
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Timer adjustment
Pump speed r/min   350--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   300
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   600
Advance angle deg.   1.3 0.8 1.8
Timer adjustment_04
Pump speed r/min   1000
Advance angle deg.   3.5 3 4
Timer adjustment_05
Pump speed r/min   1400
Advance angle deg.   6 5.5 6.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101671-9840
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)RACK LIMIT: RAL
----------
DL=7.7-0.2mm RAL=12.7+-0.1mm
----------

Speed control lever angle

Test data 101671-9840
F:Full speed
----------

----------
a=10deg+-5deg

0000000901

Test data 101671-9840
F:Full load I:Idle S:Stop (1)Rack position aa (pump speed bb r/min )
----------
aa=7.7mm bb=0r/min
----------
a=39deg+-3deg b=10.5deg+-3deg c=13deg+-5deg




Have questions with 101671-9840?





Group cross 101671-9840 ZEXEL

Nissan-Diesel 

101671-9800  
 
16800Z5020 
INJECTION-PUMP ASSEMBLY
ED6
101671-9810  
 
16712Z5020 
INJECTION-PUMP ASSEMBLY
ED6
101671-9820  
 
16713Z5017 
INJECTION-PUMP ASSEMBLY
ED6
101671-9830  

101671-9850 
9 400 615 952 
1671795012 
INJECTION-PUMP ASSEMBLY
ND605
101671-9840  

101671-9841 
 
 
INJECTION-PUMP ASSEMBLY
ND6
101671-9841  
 
1671395060 
INJECTION-PUMP ASSEMBLY
ND6
101671-9850  
 
1671295002 
INJECTION-PUMP ASSEMBLY
ND605
101671-9860  
 
1679095017 
INJECTION-PUMP ASSEMBLY
ND604
Back to top