101671-9660 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016719660 16700z5010


101671-9660 INJECTION-PUMP ASSEMBLY
Rating:
16
Buy INJECTION-PUMP ASSEMBLY 101671-9660 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101671-9660 1016719660
NISSAN-DIESEL 16700Z5010 16700z5010

Cross reference number

ZEXEL 101671-9660 1016719660
NISSAN-DIESEL 16700Z5010 16700z5010


Zexel num
Bosch num
Firm num
Name
101671-9660 
 
16700Z5010  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
ED6 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.6 2.55 2.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.9
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   68.3 66.3 70.3
Max. variation between cylinders %   0 -3 3
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   12.9
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   63 61.6 64.4
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   13.2
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   60.7 58 63.4
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   9+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10 7.7 12.3
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   (600)
Advance angle deg.   1.1
Timer adjustment_03
Pump speed r/min   800
Advance angle deg.   1.3 0.8 1.8
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   2.8 2.3 3.3
Timer adjustment_05
Pump speed r/min   1400
Advance angle deg.   4.5 4 5
Timer adjustment_06
Pump speed r/min   1600
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101671-9660
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)RACK LIMIT: RAL
----------
DL=9-0.2mm RAL=14.5+-0.1mm
----------

0000000901

Test data 101671-9660
F:Full load I:Idle
----------

----------
a=14deg+-5deg b=34deg+-3deg

Stop lever angle

Test data 101671-9660
N:Pump normal S:Stop the pump.
----------

----------
a=60deg+-5deg b=72deg+-5deg

Timing setting

Test data 101671-9660
(1)Pump vertical direction (2)Position of gear mark 'P' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 101671-9660?





Group cross 101671-9660 ZEXEL

Nissan-Diesel 

 
16713Z5003 
INJECTION-PUMP ASSEMBLY
ED6
 
16713Z5013 
INJECTION-PUMP ASSEMBLY
ED6
 
1670095100 
INJECTION-PUMP ASSEMBLY
ND6
 
16713Z5014 
INJECTION-PUMP ASSEMBLY
ED6
 
1679095001 
INJECTION-PUMP ASSEMBLY
 
1679095002 
INJECTION-PUMP ASSEMBLY
ND6
101671-9660  
 
16700Z5010 
INJECTION-PUMP ASSEMBLY
ED6
 
16713Z5004 
INJECTION-PUMP ASSEMBLY
ED6
 
16713Z5015 

ED6
 
 
INJECTION-PUMP ASSEMBLY
ND6
9 400 615 949 
1670095101 
INJECTION-PUMP ASSEMBLY
ND6
Back to top