1. Home
  2. injection
  3. #1016709040

101670-9040 ZEXEL 0400866093 BOSCH INJECTION-PUMP ASSEMBLY


101670-9040 INJECTION-PUMP ASSEMBLY
Rating:
15

Information injection-pump assembly

ZEXEL 101670-9040 1016709040
BOSCH 0400866093 0400866093

Include in #2:

104740-8250 as _

Cross reference number

ZEXEL 101670-9040 1016709040
BOSCH 0400866093 0400866093


Zexel num Bosch num Firm num Firm Name
101670-9040    0400866093  BOSCH INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE
101670-9040  9 400 615 945      INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:



Adjustment conditions Test oil   ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe mm   6-2-600
Outer diameter - inner diameter - length (mm)
Tester oil delivery pressure kPa   98 98 98
Tester oil delivery pressure kgf/cm2   1 1 1
Direction of rotation (viewed from drive side)   R
Right


Injection timing adjustment Direction of rotation (viewed from drive side)   R
Right
Injection order   1-5-3-6- 2-4
Pre-stroke mm   1.9 1.9 2
Beginning of injection position   NO.1
Drive side
Difference between angles 1 deg.   60 59.5 60.5
Cal 1-5
Difference between angles 2 deg.   120 119.5 120.5
Cal 1-3
Difference between angles 3 deg.   180 179.5 180.5
Cal 1-6
Difference between angles 4 deg.   240 239.5 240.5
Cyl.1-2
Difference between angles 5 deg.   300 299.5 300.5
Cal 1-4


Injection quantity adjustment Adjusting point   -
Rack position   12.6
Pump speed r/min   1130 1130 1130
Each cylinder's injection qty mm3/st.   63.8 62.8 64.8
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *


Injection quantity adjustment_02 Adjusting point   -
Rack position   8.5+-0.5
Pump speed r/min   325 325 325
Each cylinder's injection qty mm3/st.   10.5 9.5 11.5
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *


Injection quantity adjustment_03 Adjusting point   A
Rack position   -
Pump speed r/min   1130 1130 1130
Average injection quantity mm3/st.   63.8 63.3 64.3
Fixing the lever   *

Test data Ex:



Governor adjustment

Test data 101670-9040 N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Torque control stroke: L1 (N = N1 and N = N2 rack difference). (3)Main spring setting (4)Torque control stroke
----------
K=(12) L1=0.7+-0.05mm N1=1130r/min N2=500r/min
----------



Speed control lever angle

Test data 101670-9040 F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=22deg+-4deg b=12deg+-4deg




Last questions:

Maynard Loton
24-09-2021

I used to be advised this blog site by the use of my cousin. Im not pa


Have questions with 101670-9040?

toggle preview




Group cross 101670-9040 ZEXEL

Nissan-Diesel 

101670-9000    1670090815  INJECTION-PUMP ASSEMBLY
UDV12
101670-9010    1670090816  INJECTION-PUMP ASSEMBLY
UDV12
101670-9020  9 400 615 943  1671795007  INJECTION-PUMP ASSEMBLY
ND6

Bosch 

101670-9030    0400866092  INJECTION-PUMP ASSEMBLY
F6L912
101670-9030  9 400 615 944    INJECTION-PUMP ASSEMBLY
F6L912

Bosch 

101670-9040    0400866093  INJECTION-PUMP ASSEMBLY
F6L912
101670-9040  9 400 615 945    INJECTION-PUMP ASSEMBLY
F6L912

Nissan-Diesel 

101670-9050    1671795010  INJECTION-PUMP ASSEMBLY
ND6
Back to top