101670-9030 ZEXEL 0400866092 BOSCH INJECTION-PUMP ASSEMBLY 1016709030 0400866092


101670-9030 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 101670-9030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101670-9030 1016709030
BOSCH 0400866092 0400866092

Include in #2:

Cross reference number

ZEXEL 101670-9030 1016709030
BOSCH 0400866092 0400866092


Zexel num
Bosch num
Firm num
Name
101670-9030 
 
0400866092  BOSCH
INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE
101670-9030 
9 400 615 944 
   
INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   98 98 98
Tester oil delivery pressure kgf/cm2   1 1 1
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   1.9 1.9 2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.5
Pump speed r/min   1380 1380 1380
Each cylinder's injection qty mm3/st.   63.8 62.8 64.8
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.5+-0.5
Pump speed r/min   325 325 325
Each cylinder's injection qty mm3/st.   10.5 9.5 11.5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   11.5+-0. 5
Pump speed r/min   1380 1380 1380
Average injection quantity mm3/st.   63.8 63.3 64.3
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 101670-9030
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Torque control stroke: L1 (N = N1 and N = N2 rack difference). (3)Main spring setting
----------
K=(12) L1=1.2+-0.1mm N1=1380r/min N2=400r/min
----------

Speed control lever angle

Test data 101670-9030
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=20deg+-4deg b=28deg+-4deg




Have questions with 101670-9030?





Group cross 101670-9030 ZEXEL

Nissan-Diesel 

 
1670090815 
INJECTION-PUMP ASSEMBLY
UDV12
 
1670090816 
INJECTION-PUMP ASSEMBLY
UDV12
9 400 615 943 
1671795007 
INJECTION-PUMP ASSEMBLY
ND6

Bosch 

101670-9030  
 
0400866092 
INJECTION-PUMP ASSEMBLY
F6L912
101670-9030  
9 400 615 944 
 
INJECTION-PUMP ASSEMBLY
F6L912

Bosch 

 
0400866093 
INJECTION-PUMP ASSEMBLY
F6L912
9 400 615 945 
 
INJECTION-PUMP ASSEMBLY
F6L912

Nissan-Diesel 

 
1671795010 
INJECTION-PUMP ASSEMBLY
ND6
Back to top