101660-9110 ZEXEL 0400466089 BOSCH INJECTION-PUMP ASSEMBLY

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 101660-9110 1016609110

BOSCH 0400466089 0400466089

Include in #2:

104740-8280 as _

104740-8281

Cross reference number

ZEXEL 101660-9110 1016609110

BOSCH 0400466089 0400466089

Zexel num Bosch num Firm num Firm Name

101660-9110 0400466089 BOSCH INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE

101660-9110 9 400 615 941 INJECTION-PUMP ASSEMBLY
F6L912 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions Test oil ISO4113 or {SAEJ967d}
1404 Test oil

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe mm 6-2-600
Outer diameter - inner diameter - length (mm)

Tester oil delivery pressure kPa 98 98 98

Tester oil delivery pressure kgf/cm2 1 1 1

Direction of rotation (viewed from drive side) R
Right

Injection timing adjustment Direction of rotation (viewed from drive side) R
Right

Injection order 1-5-3-6- 2-4

Pre-stroke mm 1.9 1.9 2

Beginning of injection position NO.1
Drive side

Difference between angles 1 deg. 60 59.5 60.5
Cal 1-5

Difference between angles 2 deg. 120 119.5 120.5
Cal 1-3

Difference between angles 3 deg. 180 179.5 180.5
Cal 1-6

Difference between angles 4 deg. 240 239.5 240.5
Cyl.1-2

Difference between angles 5 deg. 300 299.5 300.5
Cal 1-4

Injection quantity adjustment Adjusting point -

Rack position 10.5

Pump speed r/min 1130 1130 1130

Each cylinder's injection qty mm3/st. 42.5 41.5 43.5

Basic *

Fixing the rack *

Injection quantity adjustment_02 Adjusting point -

Rack position 8.5+-0.5

Pump speed r/min 325 325 325

Each cylinder's injection qty mm3/st. 9 8 10

Fixing the rack *

Injection quantity adjustment_03 Adjusting point A

Rack position -

Pump speed r/min 1130 1130 1130

Average injection quantity mm3/st. 42.5 42 43

Fixing the lever *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Torque control stroke: L1 (N = N1 and N = N2 rack difference). (3)Main spring setting
----------
K=(12) L1=1+-0.1mm N1=1130r/min N2=500r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=19deg+-4deg b=14deg+-4deg

Have questions with 101660-9110?

Group cross 101660-9110 ZEXEL

101660-9100 01707060
F6L912

Bosch

101660-9110 0400466089 INJECTION-PUMP ASSEMBLY
F6L912

101660-9110 9 400 615 941 INJECTION-PUMP ASSEMBLY
F6L912