101631-9690 ZEXEL 9 400 610 276 BOSCH INJECTION-PUMP ASSEMBLY 9400610276 1016319690 16700c6305


101631-9690 INJECTION-PUMP ASSEMBLY
Rating:
55
Buy INJECTION-PUMP ASSEMBLY 101631-9690 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 276 9400610276
ZEXEL 101631-9690 1016319690
NISSAN-DIESEL 16700C6305 16700c6305

Service parts 101631-9690 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101063-9300
3. GOVERNOR 105542-3800
4. SUPPLY PUMP 105220-4871
5. AUTOM. ADVANCE MECHANIS 105622-0820
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1881
11. Nozzle and Holder 16600-20053
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105071-1241
14. NOZZLE 105000-1080
15. NOZZLE SET

Include in #1:

101631-9690 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 610 276 9400610276
ZEXEL 101631-9690 1016319690
NISSAN-DIESEL 16700C6305 16700c6305


Zexel num
Bosch num
Firm num
Name
101631-9690 
9 400 610 276 
16700C6305  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
SD33 * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.15 2.1 2.2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   32.5 31.5 33.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.1+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7.5 6.4 8.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   1.7 1.2 2.2
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   3.6 3.1 4.1
Timer adjustment_04
Pump speed r/min   1900
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101631-9690
N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1 (4)RACK LIMIT: RAL (5)Beginning of idle sub spring operation: L1
----------
RAL=16mm L1=8+0.3mm
----------

Speed control lever angle

Test data 101631-9690
B:When boosted N:Normal S:Stop (1)Rack position = aa (2)Rack position bb
----------
aa=0mm bb=16mm
----------
a=23deg+-3deg b=8deg+-5deg c=2deg+-5deg

0000001501 ACS

Test data 101631-9690
(N): Speed of the pump (P): governor's negative pressure (Pa): aneroid compensator's negative pressure (A) rubber boot (B) Nut (c) Nut (D) Lever 1. Aneroid compensator installation (1)Turn nut (C) to adjust gap to L1. (Remove rubber boot at adjustment.) (2)Lock using nut (B). (3)After installation, the lever D must move smoothly when the lever D is moved to the excess fuel side, and R = R1 or more.
----------
L1=0.1~0.5mm R1=16mm
----------
N=1000r/min P=1.96kPa(200mmAq) R1=11.6mm R2=11.55mm R3=11+-0.2mm R4=10.8+-0.2mm Pa1=9.3-5.3kPa(70-40mmHg) Pa2=18kPa(135mmHg) Pa3=21.9kPa(164mmHg)

Timing setting

Test data 101631-9690
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(140deg)




Have questions with 101631-9690?





Group cross 101631-9690 ZEXEL

Nissan-Diesel 

 
16700C6809 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
16700C6810 
INJECTION-PUMP ASSEMBLY
SD33
9 400 619 605 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 926 
1679090067 
INJECTION-PUMP ASSEMBLY
SD33
 
1680090002 
INJECTION-PUMP ASSEMBLY
SD33
 
1671290064 
INJECTION-PUMP ASSEMBLY
SD33
 
1679090069 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 003 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 038 
16700C6811 
INJECTION-PUMP ASSEMBLY
SD33
 
1671290066 
INJECTION-PUMP ASSEMBLY
SD3305
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 285 
16700C7300 
INJECTION-PUMP ASSEMBLY
SD33
101631-9690  
9 400 610 276 
16700C6305 
INJECTION-PUMP ASSEMBLY
SD33
Back to top