101631-9620 ZEXEL 9 400 619 605 BOSCH INJECTION-PUMP ASSEMBLY 9400619605 1016319620


101631-9620 INJECTION-PUMP ASSEMBLY
Rating:
45
Buy INJECTION-PUMP ASSEMBLY 101631-9620 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 605 9400619605
ZEXEL 101631-9620 1016319620

Service parts 101631-9620 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101063-9290
3. GOVERNOR 105410-4830
4. SUPPLY PUMP 105220-4630
5. AUTOM. ADVANCE MECHANIS 105622-0250
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

101631-9620 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 619 605 9400619605
ZEXEL 101631-9620 1016319620


Zexel num
Bosch num
Firm num
Name
101631-9620 
101631-9621 
9 400 619 605 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.5
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   33.3 32.3 34.3
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   14.2+-0. 5
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   35.5 32.5 38.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.8
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7.5 6.4 8.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   -
Rack position   -
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   33.3 32.8 33.8
Remarks
Set full load.
 
Timer adjustment
Pump speed r/min   500+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   2.8 2 3.5
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   7.5 7.5 7.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101631-9620
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=15
----------

Speed control lever angle

Test data 101631-9620
F:Full speed I:Idle S:Stop
----------

----------
a=16deg+-5deg b=25deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 101631-9620
N:Pump normal S:Stop the pump.
----------

----------
a=(19deg) b=(34deg)

Timing setting

Test data 101631-9620
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101631-9620?





Group cross 101631-9620 ZEXEL

Nissan-Diesel 

 
16700C6809 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
16700C6810 
INJECTION-PUMP ASSEMBLY
SD33
101631-9620  

101631-9621 
9 400 619 605 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 926 
1679090067 
INJECTION-PUMP ASSEMBLY
SD33
 
1680090002 
INJECTION-PUMP ASSEMBLY
SD33
 
1671290064 
INJECTION-PUMP ASSEMBLY
SD33
 
1679090069 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 003 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 038 
16700C6811 
INJECTION-PUMP ASSEMBLY
SD33
 
1671290066 
INJECTION-PUMP ASSEMBLY
SD3305
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 285 
16700C7300 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 276 
16700C6305 
INJECTION-PUMP ASSEMBLY
SD33
Back to top