Rating:
Information injection-pump assembly
BOSCH
F 01G 09U 1HV
f01g09u1hv
ZEXEL
101609-9360
1016099360
MITSUBISHI-HEAV
3436511010
3436511010
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injection Pump Model 201-3780 10R-7651 101609-9360 for Caterpillar CAT 3066 S6KT Engine 320C 320C FM Excavator
TUWODE Part Number: 201-3780 10R-7651 101609-9360 || Item Name: Fuel Injection Pump || Application: for Caterpillar Excavator 320C 320C FM || Reduced emissions: Better fuel management reduces unburned fuel and harmful emissions, making the engine more environmentally friendly. || Double-check the product picture and part number to make sure it's the item you're looking for and avoid buying the wrong one.
TUWODE Part Number: 201-3780 10R-7651 101609-9360 || Item Name: Fuel Injection Pump || Application: for Caterpillar Excavator 320C 320C FM || Reduced emissions: Better fuel management reduces unburned fuel and harmful emissions, making the engine more environmentally friendly. || Double-check the product picture and part number to make sure it's the item you're looking for and avoid buying the wrong one.
$1,664.90
16 Oct 2023
CN: GEMMOE
201-3780 10R-7651 101609-9360 Fuel Injection Pump for Caterpillar CAT 3066 S6KT Engine 320C 320C FM Excavator
Thcbme Part Number: 201-3780 10R-7651 101609-9360 || Engine Model: for Caterpillar 3066 S6K Engine || Application: for Caterpillar Excavator 320C 320C FM || Reliability: Ensure stable and reliable fuel supply to the engine. || Confirm Fit: Make sure the part number is the same or that the part is an exact match for your vehicle.
Thcbme Part Number: 201-3780 10R-7651 101609-9360 || Engine Model: for Caterpillar 3066 S6K Engine || Application: for Caterpillar Excavator 320C 320C FM || Reliability: Ensure stable and reliable fuel supply to the engine. || Confirm Fit: Make sure the part number is the same or that the part is an exact match for your vehicle.
10R-7651 201-3780 101609-9360 Diesel Common Rail Injection Pump for Caterpillar CAT 3066 Mitsubishi S6KT 320C Excavator
HIRINTOL ▶️REFERENCE PART NUMBER: 10R-7651, 201-3780, 101609-9360. || ▶️APPLICATION: for Caterpillar 3066 Mitsubishi S6KT 320C Excavator. || ▶️EFFICIENT AND STABLE: Using advanced technology, it can provide efficient and stable fuel supply to ensure the normal operation of the vehicle. || ▶️DURABLE AND RELIABLE: Tested and proven many times, it has a long life and reliable quality to keep working under extreme conditions. || ▶️EASY INSTALLATION: standard interface design, easy installation, plug and play, no professional skills required.
HIRINTOL ▶️REFERENCE PART NUMBER: 10R-7651, 201-3780, 101609-9360. || ▶️APPLICATION: for Caterpillar 3066 Mitsubishi S6KT 320C Excavator. || ▶️EFFICIENT AND STABLE: Using advanced technology, it can provide efficient and stable fuel supply to ensure the normal operation of the vehicle. || ▶️DURABLE AND RELIABLE: Tested and proven many times, it has a long life and reliable quality to keep working under extreme conditions. || ▶️EASY INSTALLATION: standard interface design, easy installation, plug and play, no professional skills required.
Service parts 101609-9360 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
12.
Open Pre:MPa(Kqf/cm2)
17.7(180)
15.
NOZZLE SET
Cross reference number
BOSCH
F 01G 09U 1HV
f01g09u1hv
ZEXEL
101609-9360
1016099360
MITSUBISHI-HEAV
3436511010
3436511010
Zexel num
Bosch num
Firm num
Name
101609-9360
F 01G 09U 1HV
3436511010 MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6K-T K
S6K-T K
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600
Outer diameter - inner diameter - length (mm) mm 6-2-600
Overflow valve
131424-5720
Overflow valve opening pressure
kPa
255
221
289
Overflow valve opening pressure
kgf/cm2
2.6
2.25
2.95
Tester oil delivery pressure
kPa
255
255
255
Tester oil delivery pressure
kgf/cm2
2.6
2.6
2.6
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right R
Right R
Injection order
1-5-3-6-
2-4
Pre-stroke
mm
3.55
3.5
3.6
Rack position
After adjusting injection quantity. R=A
After adjusting injection quantity. R=A
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5
Cal 1-5 deg. 60 59.5 60.5
Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5
Cal 1-3 deg. 120 119.5 120.5
Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5
Cal 1-6 deg. 180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5
Cyl.1-2 deg. 240 239.5 240.5
Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5
Cal 1-4 deg. 300 299.5 300.5
Injection quantity adjustment
Adjusting point
A
Rack position
9.8
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
120.5
119.5
121.5
Max. variation between cylinders
%
0
-2.5
2.5
Basic
*
Fixing the lever
*
Injection quantity adjustment_02
Adjusting point
C
Rack position
5.8+-0.5
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
9.5
8.2
10.8
Max. variation between cylinders
%
0
-14
14
Fixing the rack
*
Injection quantity adjustment_03
Adjusting point
D
Rack position
10++
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
125
125
130
Fixing the lever
*
Rack limit
*
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Tolerance for racks not indicated: +-0.05mm.
(3)RACK LIMIT
(4)Rack difference between N = N1 and N = N2
(5)Set idle sub-spring
----------
K=5 N1=900r/min N2=350r/min
----------
----------
K=5 N1=900r/min N2=350r/min
----------
Speed control lever angle
F:Full speed
I:Idle
S:Stop
(1)Stopper bolt setting
----------
----------
a=31deg+-3deg b=12deg+-5deg c=6deg+-5deg
----------
----------
a=31deg+-3deg b=12deg+-5deg c=6deg+-5deg
Stop lever angle
N:Pump normal
S:Stop the pump.
(1)Use the hole at R = aa
(2)Speed = bb, rack position = cc (sealed at delivery)
(3)Normal
----------
aa=25mm bb=0r/min cc=1-0.5mm
----------
a=21deg+-5deg b=(55deg)
----------
aa=25mm bb=0r/min cc=1-0.5mm
----------
a=21deg+-5deg b=(55deg)
0000001501 I/P WITH LOAD PLUNGER ADJ
Load plunger-equipped pump adjustment
1. Adjust the variation between cylinders and the injection quantity.
2. At Full point A, adjust the pre-stroke to the specified value.
3. After pre-stroke adjustment, reconfirm that the fuel injection quantity and the variation between cylinders is as specified.
----------
----------
----------
----------
Timing setting
(1)Pump vertical direction
(2)Position of gear mark '3' at No 1 cylinder's beginning of injection
(3)B.T.D.C.: aa
(4)After adjusting the injection quantity, adjust at rack position bb.
----------
aa=6deg bb=(9.8)mm
----------
a=(110deg)
----------
aa=6deg bb=(9.8)mm
----------
a=(110deg)
Have questions with 101609-9360?
Group cross 101609-9360 ZEXEL
Mitsubishi-Heav
Dpico
Mitsubishi-Heav
101609-9360
F 01G 09U 1HV
3436511010
INJECTION-PUMP ASSEMBLY
S6K-T
S6K-T