101609-9181 ZEXEL 9 400 612 804 BOSCH INJECTION-PUMP ASSEMBLY 9400612804 1016099181 3436106040


101609-9181 INJECTION-PUMP ASSEMBLY
Rating:
48
Buy INJECTION-PUMP ASSEMBLY 101609-9181 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 804 9400612804
ZEXEL 101609-9181 1016099181
MITSUBISHI-HEAV 3436106040 3436106040

Service parts 101609-9181 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8530
3. GOVERNOR 105419-4600
4. SUPPLY PUMP 105220-7180
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-6940
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3330
14. NOZZLE 105017-3150
15. NOZZLE SET

Include in #1:

101609-9181 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 612 804 9400612804
ZEXEL 101609-9181 1016099181
MITSUBISHI-HEAV 3436106040 3436106040


Zexel num
Bosch num
Firm num
Name
101609-9181 
9 400 612 804 
3436106040  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6K-T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5720
Overflow valve opening pressure kPa   255 255 255
Overflow valve opening pressure kgf/cm2   2.6 2.6 2.6
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.6
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   103 102 104
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.6+-0.5
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   12 10.7 13.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   9.8++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101609-9181
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Negative torque control does not operate (4)RACK LIMIT (5)Set idle sub-spring (6)Main spring setting
----------
K=9
----------

Speed control lever angle

Test data 101609-9181
F:Full speed I:Idle S:Stop (1)Stopper bolt setting
----------

----------
a=31deg+-3deg b=14deg+-5deg c=3deg+-5deg

Stop lever angle

Test data 101609-9181
N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb. (2)Normal
----------
aa=1-0.5mm bb=0r/min
----------
a=21deg+-5deg b=(55deg)

Timing setting

Test data 101609-9181
(1)Pump vertical direction (2)Position of camshaft's key groove at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 101609-9181?





Group cross 101609-9181 ZEXEL

Dpico 

F 019 Z20 037 
 
INJECTION-PUMP ASSEMBLY
DB58TI

Mitsubishi-Heav 

9 400 612 369 
3436106010 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 612 037 
3436105080 
INJECTION-PUMP ASSEMBLY
S6K

Dpico 

F 019 Z20 038 
 
INJECTION-PUMP ASSEMBLY
DB58TI
F 019 Z20 039 
 
INJECTION-PUMP ASSEMBLY
DB58T

Mitsubishi-Heav 

9 400 612 211 
3436115070 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 612 695 
3436128030 
INJECTION-PUMP ASSEMBLY
S6K
9 400 612 696 
 
INJECTION-PUMP ASSEMBLY
9 400 612 803 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

9 400 612 950 
3436501010 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 615 919 
3436501011 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 612 697 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

101609-9181  
9 400 612 804 
3436106040 
INJECTION-PUMP ASSEMBLY
S6K-T
 
3436501030 
INJECTION-PUMP ASSEMBLY
S6K
9 400 615 920 
3436501031 
INJECTION-PUMP ASSEMBLY
S6K
F 019 Z20 040 
3436501032 
INJECTION-PUMP ASSEMBLY
S6K-T
 
3436501033 
INJECTION-PUMP ASSEMBLY
S6K-T
Back to top