101608-9361 ZEXEL 9 400 615 873 BOSCH INJECTION-PUMP ASSEMBLY 9400615873 1016089361 16713z6875


101608-9361 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 101608-9361 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 873 9400615873
ZEXEL 101608-9361 1016089361
NISSAN-DIESEL 16713Z6875 16713z6875

Service parts 101608-9361 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5550
3. GOVERNOR 105921-9500
4. SUPPLY PUMP 105220-7010
5. AUTOM. ADVANCE MECHANIS 105672-0740
6. COUPLING PLATE 105662-1620
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-7300
11. Nozzle and Holder 16600-Z5667
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/20.6{210}
13. NOZZLE-HOLDER 105048-4070
14. NOZZLE
15. NOZZLE SET 105019-1080

Include in #1:

101608-9361 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 615 873 9400615873
ZEXEL 101608-9361 1016089361
NISSAN-DIESEL 16713Z6875 16713z6875


Zexel num
Bosch num
Firm num
Name
101608-9361 
9 400 615 873 
16713Z6875  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6E K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8260
Bosch type code   9 430 610 133
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   18
Opening pressure kgf/cm2   184
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131425-0420
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   90 88.4 91.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   9.5+-0.5
Pump speed r/min   265 265 265
Average injection quantity mm3/st.   9 7.2 10.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.6)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   90 89 91
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.9
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   95 91 99
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   (R1-0.25 )
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   86.5 82.5 90.5
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   120 120 130
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (900)
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1080
Advance angle deg.   2 1.5 2.5
Timer adjustment_03
Pump speed r/min   1225
Advance angle deg.   2 1.5 2.5
Timer adjustment_04
Pump speed r/min   1425
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-9361
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=M44
----------

Speed control lever angle

Test data 101608-9361
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=36mm
----------
a=25deg+-5deg b=42deg+-3deg

Stop lever angle

Test data 101608-9361
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=40deg+-5deg b=25deg+-5deg

Timing setting

Test data 101608-9361
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101608-9361?





Group cross 101608-9361 ZEXEL

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
L7

China 

9 400 615 870 
 
INJECTION-PUMP ASSEMBLY
6105Q1
9 400 615 871 
 
INJECTION-PUMP ASSEMBLY
6105Q1
9 400 615 872 
 
INJECTION-PUMP ASSEMBLY
6102BZ

Nissan-Diesel 

9 400 613 318 
16790Z5610 
INJECTION-PUMP ASSEMBLY
FE654
 
16713Z6767 
INJECTION-PUMP ASSEMBLY
FE6E
101608-9361  
9 400 615 873 
16713Z6875 
INJECTION-PUMP ASSEMBLY
FE6E
 
16713Z6766 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 874 
16713Z6878 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 612 117 
16712Z5514 
INJECTION-PUMP ASSEMBLY
FE655
 
16713Z6715 
INJECTION-PUMP ASSEMBLY
FE6A
Back to top