101608-6333 ZEXEL F 019 Z20 020 BOSCH INJECTION-PUMP ASSEMBLY f019z20020 1016086333 me442644


101608-6333 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 101608-6333 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 020 f019z20020
ZEXEL 101608-6333 1016086333
MITSUBISHI ME442644 me442644

Service parts 101608-6333 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6730
3. GOVERNOR 105411-2373
4. SUPPLY PUMP 105210-5451
5. AUTOM. ADVANCE MECHANIS 105680-9000
6. COUPLING PLATE 105663-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-5190
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3660
14. NOZZLE 105025-3250
15. NOZZLE SET

Include in #1:

101608-6333 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH F 019 Z20 020 f019z20020
ZEXEL 101608-6333 1016086333
MITSUBISHI ME442644 me442644


Zexel num
Bosch num
Firm num
Name
101608-6333 
101608-6334 
F 019 Z20 020 
ME442644  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16TL * K 14BN INJECTION PUMP ASSY PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   116 115 117
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   54.7 54.7
Boost pressure mmHg   410 410
Injection quantity adjustment_02
Adjusting point   C
Rack position   8.1+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   8.5 7 10
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   E
Rack position   11.7++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   95 95 105
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   9.5
Boost pressure kPa   15.3 8.6 22
Boost pressure mmHg   115 65 165
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   10.7
Boost pressure kPa   45.3 42.6 48
Boost pressure mmHg   340 320 360
Timer adjustment
Pump speed r/min   1070--
Advance angle deg.   0 0 0
Load   4/4
Remarks
Beginning of advance.
 
Timer adjustment_02
Pump speed r/min   440
Advance angle deg.   3 2.5 3.5
Load   0/4
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   0/4
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   1020
Advance angle deg.   0.5
Load   4/4
Timer adjustment_05
Pump speed r/min   1330
Advance angle deg.   3 2.5 3.5
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-6333
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Set idle sub-spring (6)Main spring setting (7)Rack difference between N = N1 and N = N2
----------
K=11 BCL=1.2+-0.1mm N1=1400r/min N2=650r/min
----------

Speed control lever angle

Test data 101608-6333
F:Full speed I:Idle (1)Stopper bolt setting (2)Base lever only
----------

----------
a=(17deg)+-5deg b=(34deg)+-5deg

Stop lever angle

Test data 101608-6333
N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=4-0.5mm
----------
a=28deg+-5deg b=(48deg)

Timing setting

Test data 101608-6333
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=6.5deg
----------
a=(3deg)




Have questions with 101608-6333?





Group cross 101608-6333 ZEXEL

9 400 619 503 
 
INJECTION-PUMP ASSEMBLY
9 400 612 535 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 259 
ME440573 
INJECTION-PUMP ASSEMBLY
6D16TL
101608-6333  

101608-6334 
F 019 Z20 020 
ME442644 
INJECTION-PUMP ASSEMBLY
6D16TL
F 01G 09U 1GF 
ME444580 
INJECTION-PUMP ASSEMBLY
6D16TL
Back to top