Fuel injectors
  1. Home
  2. injection
  3. #1016086124

101608-6124 ZEXEL 9 400 611 711 BOSCH INJECTION-PUMP ASSEMBLY 9400611711 1016086124 me219068


101608-6124 INJECTION-PUMP ASSEMBLY
Rating:
44
Buy INJECTION-PUMP ASSEMBLY 101608-6124 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 711 9400611711
ZEXEL 101608-6124 1016086124
MITSUBISHI ME219068 me219068

Service parts 101608-6124 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-9900
3. GOVERNOR 105400-9110
4. SUPPLY PUMP 105210-5250
5. AUTOM. ADVANCE MECHANIS 105676-1160
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101608-6124 as INJECTION-PUMP ASSEMBLY

Include in #2:

104748-0511 as _

Cross reference number

BOSCH 9 400 611 711 9400611711
ZEXEL 101608-6124 1016086124
MITSUBISHI ME219068 me219068


Zexel num
Bosch num
Firm num
Name
101608-6124 
9 400 611 711 
ME219068  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D34T K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.1
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   79.5 78.5 80.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.6+-0.5
Pump speed r/min   475 475 475
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2 1.5 2.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 1.5 2.5
Remarks
Measure speed (beginning of operation).  
Timer adjustment_03
Pump speed r/min   750+-25
Advance angle deg.   0 0 0
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101608-6124
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=9
----------

Speed control lever angle

Test data 101608-6124
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=0deg+-5deg b=19deg+-5deg

Stop lever angle

Test data 101608-6124
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101608-6124
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101608-6124?





Group cross 101608-6124 ZEXEL

101608-6120  
 
 
INJECTION-PUMP ASSEMBLY
101608-6121  
 
 
INJECTION-PUMP ASSEMBLY
101608-6122  
 
 
INJECTION-PUMP ASSEMBLY
101608-6123  

101608-6124 
9 400 611 442 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101608-6124  
9 400 611 711 
ME219068 
INJECTION-PUMP ASSEMBLY
6D34T
Back to top