101608-1981 ZEXEL F 01G 09U 1HM BOSCH INJECTION-PUMP ASSEMBLY f01g09u1hm 1016081981 me306178

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101608-1981 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 1HM f01g09u1hm

ZEXEL 101608-1981 1016081981

MITSUBISHI ME306178 me306178

Service parts 101608-1981 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8011

3. GOVERNOR 105932-2960

4. SUPPLY PUMP 105210-6020

5. AUTOM. ADVANCE MECHANIS 105672-5630

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7522

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 15.7(160)/21.6(220)

13. NOZZLE-HOLDER 105041-3031

14. NOZZLE

15. NOZZLE SET 105019-0690

Include in #1:

101402-8340 as _

101608-1981 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 1HM f01g09u1hm

ZEXEL 101608-1981 1016081981

MITSUBISHI ME306178 me306178

Zexel num

Bosch num

Firm num

Name

101608-1981

F 01G 09U 1HM

ME306178 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D16T7

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8260

Bosch type code 9 430 610 133

Nozzle 105780-0120

Bosch type code 1 688 901 990

Nozzle holder 105780-2190

Opening pressure MPa 18

Opening pressure kgf/cm2 184

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-8420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.1

Pump speed r/min 700 700 700

Each cylinder's injection qty mm3/st. 110 106.7 113.3

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point Z

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Each cylinder's injection qty mm3/st. 12.5 10.6 14.4

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.1)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 110 109 111

Basic *

Fixing the lever *

Boost pressure kPa 23.3 23.3

Boost pressure mmHg 175 175

Injection quantity adjustment_04

Adjusting point B

Rack position R1+1

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 114.5 110.5 118.5

Fixing the lever *

Boost pressure kPa 23.3 23.3

Boost pressure mmHg 175 175

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-0. 4)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 108.5 104.5 112.5

Fixing the lever *

Boost pressure kPa 23.3 23.3

Boost pressure mmHg 175 175

Injection quantity adjustment_06

Adjusting point D

Rack position R2-0.35

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 95 91 99

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_07

Adjusting point E

Rack position (R1+0.4)

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 108.5 104.5 112.5

Fixing the lever *

Boost pressure kPa 23.3 23.3

Boost pressure mmHg 175 175

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R2-0.35

Boost pressure kPa 4 4 6.7

Boost pressure mmHg 30 30 50

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R2(R1-0. 4)

Boost pressure kPa 10 10 10

Boost pressure mmHg 75 75 75

Timer adjustment

Pump speed r/min 1000--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 950

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 3.5 3 4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=M20 BCL=0.35+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=19deg+-5deg b=41.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)With the speed lever at Full, set the stopper bolt so that speed = aa and rack position = bb (non-injection rack position). Confirm non-injection. (2)With the speed lever at idle and after setting the stopper bolt, confirm non-injection at speed = cc. Rack position = dd (non-injection rack position)
----------
aa=1400r/min bb=7-0.5mm cc=285r/min dd=(7.3)mm
----------
a=11.5deg+-5deg b=28deg+-5deg

0000001501 LEVER

(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=41.5deg+-3deg c=19deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(1deg)