101608-1761 ZEXEL 9 400 615 817 BOSCH INJECTION-PUMP ASSEMBLY 9400615817 1016081761 me170302

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101608-1761 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 817 9400615817

ZEXEL 101608-1761 1016081761

MITSUBISHI ME170302 me170302

Include in #1:

107692-1800 as _

Cross reference number

BOSCH 9 400 615 817 9400615817

ZEXEL 101608-1761 1016081761

MITSUBISHI ME170302 me170302

Zexel num

Bosch num

Firm num

Name

101608-1761
101608-6000

9 400 615 817

ME170302 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D16T7 K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8260

Bosch type code 9 430 610 133

Nozzle 105780-0120

Bosch type code 1 688 901 990

Nozzle holder 105780-2190

Opening pressure MPa 18

Opening pressure kgf/cm2 184

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-8420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.4

Pump speed r/min 900 900 900

Each cylinder's injection qty mm3/st. 110.5 107.2 113.8

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point Z

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Each cylinder's injection qty mm3/st. 12.5 10.6 14.4

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.4)

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 110.5 109.5 111.5

Basic *

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.8

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 115.5 111.5 119.5

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_05

Adjusting point C

Rack position (R1+0.1)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 130.5 126.5 134.5

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_06

Adjusting point D

Rack position R2-1.35

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 88 84 92

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_07

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 160 160 170

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R2-1.35

Boost pressure kPa 13.3 13.3 13.3

Boost pressure mmHg 100 100 100

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R2-0.55

Boost pressure kPa 40 38.7 41.3

Boost pressure mmHg 300 290 310

Boost compensator adjustment_03

Pump speed r/min 400 400 400

Rack position R2(R1+0. 1)

Boost pressure kPa 57.3 57.3 57.3

Boost pressure mmHg 430 430 430

Timer adjustment

Pump speed r/min (N1+50)- -

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min N1

Advance angle deg. 0.5

Remarks
Measure the actual speed.

Timer adjustment_03

Pump speed r/min -

Advance angle deg. 3.5 3.5 3.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=N21 BCL=1.35+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=19deg+-5deg b=41.5deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)With the speed lever at Full, set the stopper bolt so that speed = aa and rack position = bb (non-injection rack position). Confirm non-injection. (2)After setting the stopper bolt at the speed lever's idle position, confirm that there is no injection at pump speed cc and rack position dd (non-injection rack position).
----------
aa=1400r/min bb=7-0.5mm cc=285r/min dd=(7.3)mm
----------
a=11.5deg+-5deg b=28deg+-5deg

0000001501 LEVER

(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=41.5deg+-3deg c=19deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(1deg)