Fuel injectors
  1. Home
  2. injection
  3. #1016079960

101607-9960 ZEXEL 9 400 610 741 BOSCH INJECTION-PUMP ASSEMBLY 9400610741 1016079960 16713z6576


101607-9960 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 101607-9960 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 741 9400610741
ZEXEL 101607-9960 1016079960
NISSAN-DIESEL 16713Z6576 16713z6576

Service parts 101607-9960 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3440
3. GOVERNOR 105921-7650
4. SUPPLY PUMP 105220-7050
5. AUTOM. ADVANCE MECHANIS 105672-0590
6. COUPLING PLATE 105661-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6690
11. Nozzle and Holder 16600-Z5519
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-6380
15. NOZZLE SET

Include in #1:

101607-9960 as INJECTION-PUMP ASSEMBLY

Include in #2:

104746-5454 as _

Cross reference number

BOSCH 9 400 610 741 9400610741
ZEXEL 101607-9960 1016079960
NISSAN-DIESEL 16713Z6576 16713z6576


Zexel num
Bosch num
Firm num
Name
101607-9960 
9 400 610 741 
16713Z6576  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6B K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.8
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   66.3 64.7 67.9
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.5 7.7 11.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.8)
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   66.3 65.3 67.3
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.2
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   73 69.8 76.2
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1(11.8)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   83.9 79.9 87.9
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   84 84 94
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   850--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   800
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   4 3.5 4.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101607-9960
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=C43
----------

Speed control lever angle

Test data 101607-9960
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=26.5deg+-5deg b=40deg+-3deg

Stop lever angle

Test data 101607-9960
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101607-9960
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101607-9960?





Group cross 101607-9960 ZEXEL

Nissan-Diesel 

101607-9900  
9 400 615 765 
16700Z5768 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9910  
9 400 615 766 
16700Z5769 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9920  
9 400 610 739 
16713Z6572 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9930  
9 400 615 767 
16713Z6573 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9940  
9 400 610 740 
16713Z6574 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9950  
9 400 615 768 
16713Z6575 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9960  
9 400 610 741 
16713Z6576 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9970  
9 400 610 742 
16713Z6577 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9980  
9 400 615 769 
16713Z6604 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9990  
9 400 610 743 
16713Z6605 
INJECTION-PUMP ASSEMBLY
FE6A
Back to top