Fuel injectors
  1. Home
  2. injection
  3. #1016079110

101607-9110 ZEXEL 9 400 615 747 BOSCH INJECTION-PUMP ASSEMBLY 9400615747 1016079110 16713z6362


101607-9110 INJECTION-PUMP ASSEMBLY
Rating:
75
Buy INJECTION-PUMP ASSEMBLY 101607-9110 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 747 9400615747
ZEXEL 101607-9110 1016079110
NISSAN-DIESEL 16713Z6362 16713z6362

Service parts 101607-9110 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3660
3. GOVERNOR 105921-7630
4. SUPPLY PUMP 105220-7050
5. AUTOM. ADVANCE MECHANIS 105614-3710
6. COUPLING PLATE 105661-1130
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6690
11. Nozzle and Holder 16600-Z5519
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-6380
15. NOZZLE SET

Include in #1:

101402-7881 as _
101607-9110 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 747 9400615747
ZEXEL 101607-9110 1016079110
NISSAN-DIESEL 16713Z6362 16713z6362


Zexel num
Bosch num
Firm num
Name
101607-9110 
9 400 615 747 
16713Z6362  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6A K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.3
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   48.2 46.6 49.8
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.8+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9 7.2 10.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.3)
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   48.2 47.2 49.2
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.2
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   63.6 60.4 66.8
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 80 90
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (1140)
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   1500
Advance angle deg.   4 3.5 4.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101607-9110
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=C42
----------

Speed control lever angle

Test data 101607-9110
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=26.5deg+-5deg b=40deg+-3deg

Stop lever angle

Test data 101607-9110
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101607-9110
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101607-9110?





Group cross 101607-9110 ZEXEL

Nissan-Diesel 

101607-9100  
9 400 615 746 
16713Z6361 
INJECTION-PUMP ASSEMBLY
FE6A
101607-9110  
9 400 615 747 
16713Z6362 
INJECTION-PUMP ASSEMBLY
FE6A
101607-9120  
9 400 615 748 
16713Z6363 
INJECTION-PUMP ASSEMBLY
FE6A
101607-9130  
9 400 615 749 
16700Z5761 
INJECTION-PUMP ASSEMBLY
FE6B

Dpico 

101607-9140  

101607-9141 
 
 
INJECTION-PUMP ASSEMBLY
6D22
101607-9141  

106671-9310 
F 019 Z20 005 
 
INJECTION-PUMP ASSEMBLY
6D22

Nissan-Diesel 

101607-9150  

101607-9960 
F 01G 09U 05L 
16713Z6365 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9160  

101607-9970 
F 01G 09U 05M 
16713Z6366 
INJECTION-PUMP ASSEMBLY
FE6B
101607-9170  

101607-9370 
 
16713Z6379 
INJECTION-PUMP ASSEMBLY
D539X
101607-9180  

101607-9380 
 
16713Z6400 
INJECTION-PUMP ASSEMBLY
D539X
101607-9190  
9 400 615 750 
16713Z6410 
INJECTION-PUMP ASSEMBLY
FE6B
Back to top