101607-1881 ZEXEL 9 400 615 650 BOSCH INJECTION-PUMP ASSEMBLY 9400615650 1016071881 me076883

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101607-1881 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 650 9400615650

ZEXEL 101607-1881 1016071881

MITSUBISHI ME076883 me076883

Service parts 101607-1881 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101061-8391

3. GOVERNOR 105931-9060

4. SUPPLY PUMP 105210-4661

5. AUTOM. ADVANCE MECHANIS 105672-5120

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7053

11. Nozzle and Holder ME076953

12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}

13. NOZZLE-HOLDER 105041-3031

14. NOZZLE

15. NOZZLE SET 105019-0220

Include in #1:

101607-1881 as INJECTION-PUMP ASSEMBLY

107492-1092 as _

Cross reference number

BOSCH 9 400 615 650 9400615650

ZEXEL 101607-1881 1016071881

MITSUBISHI ME076883 me076883

Zexel num

Bosch num

Firm num

Name

101607-1881
101607-6050

9 400 615 650

ME076883 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D15T2 K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-8420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.4

Pump speed r/min 700 700 700

Each cylinder's injection qty mm3/st. 113.4 110 116.8

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point Z

Rack position 9.5+-0.5

Pump speed r/min 600 600 600

Each cylinder's injection qty mm3/st. 11.5 9.8 13.2

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.4)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 113.4 112.4 114.4

Basic *

Fixing the lever *

Boost pressure kPa 42.7 42.7

Boost pressure mmHg 320 320

Injection quantity adjustment_04

Adjusting point B

Rack position R1+1.15

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 132.7 128.7 136.7

Fixing the lever *

Boost pressure kPa 42.7 42.7

Boost pressure mmHg 320 320

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-0. 4)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 97.5 93.5 101.5

Fixing the lever *

Boost pressure kPa 42.7 42.7

Boost pressure mmHg 320 320

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R2-1.2

Boost pressure kPa 4 2.7 5.3

Boost pressure mmHg 30 20 40

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R2(1-0.4 )

Boost pressure kPa 29.3 29.3 29.3

Boost pressure mmHg 220 220 220

Timer adjustment

Pump speed r/min 1180--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1130

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1350

Advance angle deg. 3.5 3 4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Boost compensator stroke: BCL
----------
T1=G91 BCL=1.2+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=18.5deg+-5deg b=(41deg)+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Set the stopper bolt at pump speed = aa and rack position = bb (non-injection rack position). Confirm non-injection. (2)After setting the stopper bolt, confirm non-injection at speed cc. Rack position = dd (non-injection rack position).
----------
aa=1350r/min bb=7-0.5mm cc=275r/min dd=(8)mm
----------
a=11.5deg+-5deg b=(28deg)+-5deg

0000001501 LEVER

(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=(41deg)+-3deg c=18.5deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(2deg)