101606-9770 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016069770 1671395273


101606-9770 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101606-9770 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101606-9770 1016069770
NISSAN-DIESEL 1671395273 1671395273

Cross reference number

ZEXEL 101606-9770 1016069770
NISSAN-DIESEL 1671395273 1671395273


Zexel num
Bosch num
Firm num
Name
101606-9770 
101607-9210 
 
1671395273  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
NE6TA * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.8
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   91 89.4 92.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9 7.2 10.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.8)
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   91 90 92
Basic   *
Fixing the lever   *
Boost pressure kPa   33.3 33.3
Boost pressure mmHg   250 250
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+1.15
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   120.5 117.3 123.7
Fixing the lever   *
Boost pressure kPa   33.3 33.3
Boost pressure mmHg   250 250
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-1
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71.5 67.5 75.5
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   80 80 100
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   800 800 800
Rack position   R1-1
Boost pressure kPa   10.7 9.4 12
Boost pressure mmHg   80 70 90
Boost compensator adjustment_02
Pump speed r/min   800 800 800
Rack position   R1(12.8)
Boost pressure kPa   20 20 20
Boost pressure mmHg   150 150 150
Timer adjustment
Pump speed r/min   920--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   870
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101606-9770
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=J64 BCL=1+-0.1mm
----------

Speed control lever angle

Test data 101606-9770
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=100mm
----------
a=26.5deg+-5deg b=42deg+-3deg

Stop lever angle

Test data 101606-9770
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=36mm
----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101606-9770
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 101606-9770?





Group cross 101606-9770 ZEXEL

F 019 Z10 607 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
16713Z6261 
INJECTION-PUMP ASSEMBLY
FE6B
9 400 615 579 
16713Z6262 
INJECTION-PUMP ASSEMBLY
FE6B
 
1671395261 
INJECTION-PUMP ASSEMBLY
NE6TA
9 400 615 580 
1670095075 
INJECTION-PUMP ASSEMBLY
NE6
 
1671395219 
INJECTION-PUMP ASSEMBLY
NE6
9 400 615 581 
1670095076 
INJECTION-PUMP ASSEMBLY
NE6
 
16713Z6265 
INJECTION-PUMP ASSEMBLY
FE6A
101606-9770  

101607-9210 
 
1671395273 
INJECTION-PUMP ASSEMBLY
NE6TA
 
16713Z6269 
INJECTION-PUMP ASSEMBLY
D539X

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z10 996 
 
INJECTION-PUMP ASSEMBLY
6D22
Back to top