101606-9640 ZEXEL 9 400 615 574 BOSCH INJECTION-PUMP ASSEMBLY 9400615574 1016069640 16713z6201

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101606-9640 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 574 9400615574

ZEXEL 101606-9640 1016069640

NISSAN-DIESEL 16713Z6201 16713z6201

Include in #2:

104746-6360 as _

Cross reference number

BOSCH 9 400 615 574 9400615574

ZEXEL 101606-9640 1016069640

NISSAN-DIESEL 16713Z6201 16713z6201

Zexel num

Bosch num

Firm num

Name

101606-9640
101607-9360

9 400 615 574

16713Z6201 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FE6A * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3 2.95 3.05

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.1

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 42.2 41.2 43.2

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.8

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 53.3 52.3 54.3

Max. variation between cylinders % 0 -10 10

Fixing the lever *

Injection quantity adjustment_03

Adjusting point -

Rack position 7+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 9 7.2 10.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_04

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 80 80

Fixing the lever *

Remarks
After startup boost setting

Timer adjustment

Pump speed r/min (1140)

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1500

Advance angle deg. 4 3.5 4.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Excess fuel setting for starting: SXL (N = N1) (3)Damper spring setting (4)Variable speed specification: idling adjustment (5)Main spring setting
----------
SXL=10.5-0.2mm N1=360r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)Stopper bolt setting (3)Pump speed = aa
----------
aa=300r/min
----------
a=(26deg)+-5deg b=(22deg)+-5deg