101606-1220 ZEXEL 9 400 615 431 BOSCH INJECTION-PUMP ASSEMBLY 9400615431 1016061220 me070481


101606-1220 INJECTION-PUMP ASSEMBLY
Rating:
27
Buy INJECTION-PUMP ASSEMBLY 101606-1220 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 431 9400615431
ZEXEL 101606-1220 1016061220
MITSUBISHI ME070481 me070481

Service parts 101606-1220 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-9070
3. GOVERNOR 105412-2050
4. SUPPLY PUMP 105210-4640
5. AUTOM. ADVANCE MECHANIS 105624-5120
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5261
11. Nozzle and Holder ME035803
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105030-4990
14. NOZZLE 105015-4860
15. NOZZLE SET

Include in #1:

101606-1220 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 431 9400615431
ZEXEL 101606-1220 1016061220
MITSUBISHI ME070481 me070481


Zexel num
Bosch num
Firm num
Name
101606-1220 
101606-6020 
9 400 615 431 
ME070481  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D14T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.5
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   79.6 78.6 80.6
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   17.4 14.8 20
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   1150--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   2.5 2 3
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101606-1220
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Supplied with torque spring not set. (3)Set idle sub-spring (4)Main spring setting (5)At shipping
----------
K=12
----------

Speed control lever angle

Test data 101606-1220
F:Full speed I:Idle (1)Stopper bolt setting (2)At shipping
----------

----------
a=30deg+-5deg b=(2deg) c=15deg+-5deg

Stop lever angle

Test data 101606-1220
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=50deg+-5deg b=53deg+-5deg

Timing setting

Test data 101606-1220
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(2deg)




Have questions with 101606-1220?





Group cross 101606-1220 ZEXEL

Mitsubishi 

 
ME035351 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 430 
ME047475 
INJECTION-PUMP ASSEMBLY
6D16T
101606-1220  

101606-6020 
9 400 615 431 
ME070481 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 619 657 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 749 
ME047477 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 615 432 
ME070473 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 615 433 
ME056638 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D15T
9 400 615 434 
ME070517 
INJECTION-PUMP ASSEMBLY
6D15T
 
ME086550 
INJECTION-PUMP ASSEMBLY
6D31
9 400 615 435 
ME035391 
INJECTION-PUMP ASSEMBLY
6D14
 
ME047486 
INJECTION-PUMP ASSEMBLY
6D16
Back to top