101605-9860 ZEXEL 9 400 613 000 BOSCH INJECTION-PUMP ASSEMBLY 9400613000 1016059860 16712z5515

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-9860 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 000 9400613000

ZEXEL 101605-9860 1016059860

NISSAN-DIESEL 16712Z5515 16712z5515

Service parts 101605-9860 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-3860

3. GOVERNOR 105420-0810

4. SUPPLY PUMP 105220-7050

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-0391

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6690

11. Nozzle and Holder 16600-Z5519

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4650

14. NOZZLE

105015-6380

15. NOZZLE SET

Include in #1:

101401-7141 as _

101605-9860 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 000 9400613000

ZEXEL 101605-9860 1016059860

NISSAN-DIESEL 16712Z5515 16712z5515

Zexel num

Bosch num

Firm num

Name

101605-9860

9 400 613 000

16712Z5515 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FE6 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point B

Rack position 9.6

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 65.2 63.2 67.2

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point C

Rack position 7.3+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 8.5 6.7 10.3

Max. variation between cylinders % 0 -12 12

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Load control lever's full position (2)Variable speed specification. (3)Speed control lever full position (4)Minimum - maximum speed specification (5)Target notch: K (6)Tolerance for racks not indicated: +-0.05mm. (7)Set idle sub-spring (8)Rack difference between N = N1 and N = N2 (9)Load lever at stop
----------
K=9 N1=750r/min N2=350r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the speed at aa, set the stopper bolt (2)When pump speed set at bb (3)Stopper bolt setting
----------
aa=950r/min bb=750r/min
----------
a=5deg+-5deg b=25deg+-5deg c=8deg+-5deg

0000000901

F:Full load I:Idle S:Stop (1)Rack position aa or less, pump speed bb (2)Without return spring
----------
aa=6.8mm bb=0r/min
----------
a=(15deg)+-5deg b=(30deg)+-5deg c=(1deg)+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=C a3=- r1=750r/min r2=750r/min r3=- Q1=73.8+-2mm3/st Q2=63.3+-2mm3/st Q3=- c1=+-3% c2=+-3% c3=- a4=19 a5=18 a6=15 r4=950r/min r5=900r/min r6=750r/min

Timing setting

(1)Pump vertical direction (2)Position of coupling's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)