101605-9230 ZEXEL 9 400 615 373 BOSCH INJECTION-PUMP ASSEMBLY 9400615373 1016059230

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-9230 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 373 9400615373

ZEXEL 101605-9230 1016059230

Service parts 101605-9230 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101061-8810

3. GOVERNOR 105411-1720

4. SUPPLY PUMP 105210-4830

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2)

13. NOZZLE-HOLDER

14. NOZZLE

15. NOZZLE SET

Include in #1:

101605-9230 as INJECTION-PUMP ASSEMBLY

Include in #2:

104746-1361 as _

Cross reference number

BOSCH 9 400 615 373 9400615373

ZEXEL 101605-9230 1016059230

Zexel num

Bosch num

Firm num

Name

101605-9230

9 400 615 373

DAEWOO

INJECTION-PUMP ASSEMBLY
D1146T K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 6-2-4-1- 5-3

Pre-stroke mm 4.6 4.55 4.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 6-2 deg. 60 59.5 60.5

Difference between angles 2
Cal 6-4 deg. 120 119.5 120.5

Difference between angles 3
Cal 6-1 deg. 180 179.5 180.5

Difference between angles 4
Cal 6-5 deg. 240 239.5 240.5

Difference between angles 5
Cal 6-3 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.4

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 113 111 115

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 53.3 53.3

Boost pressure mmHg 400 400

Injection quantity adjustment_02

Adjusting point B

Rack position 7.5+-0.5

Pump speed r/min 370 370 370

Average injection quantity mm3/st. 9 7.7 10.3

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point D

Rack position 10.7

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 89 86 92

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position 10.7

Boost pressure kPa 6.7 4 9.4

Boost pressure mmHg 50 30 70

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position (11.4)

Boost pressure kPa 40 33.3 46.7

Boost pressure mmHg 300 250 350

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL (4)Main spring setting (5)Set idle sub-spring
----------
K=6 BCL=(0.7)mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=7deg+-5deg b=27deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=(55deg)