101605-3710 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016053710


101605-3710 INJECTION-PUMP ASSEMBLY
Rating:
59
Buy INJECTION-PUMP ASSEMBLY 101605-3710 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101605-3710 1016053710

Cross reference number

ZEXEL 101605-3710 1016053710


Zexel num
Bosch num
Firm num
Name
101605-3710 
101605-3711 
 
  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D110 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4 3.95 4.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   80.9 79.9 81.9
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   40 40
Boost pressure mmHg   300 300
Injection quantity adjustment_02
Adjusting point   C
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   12.3 11.1 13.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   11.3
Boost pressure kPa   13.3 9.3 17.3
Boost pressure mmHg   100 70 130
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   11.8
Boost pressure kPa   26.7 26.7 26.7
Boost pressure mmHg   200 200 200

Test data Ex:

Governor adjustment

Test data 101605-3710
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Boost compensator stroke (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=17 N1=1100r/min N2=750r/min N3=1100r/min N4=500r/min
----------

Speed control lever angle

Test data 101605-3710
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(10deg)+-5deg b=(21deg)+-5deg

Stop lever angle

Test data 101605-3710
N:Pump normal S:Stop the pump. (1)Pump speed aa, rack position bb (2)Stopper bolt setting
----------
aa=0r/min bb=1-0.2mm
----------
a=42.5deg+-5deg b=(55deg)

Timing setting

Test data 101605-3710
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 101605-3710?





Group cross 101605-3710 ZEXEL

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
6D105
9 400 612 262 
6136721481 
INJECTION-PUMP ASSEMBLY
6D105
101605-3710  

101605-3711 
 
 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 352 
6138721152 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 353 
6138721411 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 354 
6136721690 
INJECTION-PUMP ASSEMBLY
6D105
9 400 615 355 
6136721190 
INJECTION-PUMP ASSEMBLY
6D105
 
6136721660 
INJECTION-PUMP ASSEMBLY
6D105
 
6137721171 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 615 356 
6209711321 
INJECTION-PUMP ASSEMBLY
SA6D91L
9 400 615 357 
6209711331 
INJECTION-PUMP ASSEMBLY
SA6D95L
 
6138721930 
INJECTION-PUMP ASSEMBLY
SA6D110
Back to top