101605-3510 ZEXEL 9 400 610 273 BOSCH INJECTION-PUMP ASSEMBLY 9400610273 1016053510 6137721112

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-3510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 273 9400610273

ZEXEL 101605-3510 1016053510

KOMATSU 6137721112 6137721112

Service parts 101605-3510 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-2470

3. GOVERNOR 105411-1240

4. SUPPLY PUMP 105210-4570

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-0371

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6440

11. Nozzle and Holder 6137-12-3200

12. Open Pre:MPa(Kqf/cm2) 22.1{225}

13. NOZZLE-HOLDER 105031-4480

14. NOZZLE 105015-6130

15. NOZZLE SET

Include in #1:

101401-4630 as _

101605-3510 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 273 9400610273

ZEXEL 101605-3510 1016053510

KOMATSU 6137721112 6137721112

Zexel num

Bosch num

Firm num

Name

101605-3510
101605-3810

9 400 610 273

6137721112 KOMATSU

INJECTION-PUMP ASSEMBLY
S6D105 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.1

Pump speed r/min 1175 1175 1175

Average injection quantity mm3/st. 67.8 66.8 68.8

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 33.3 33.3

Boost pressure mmHg 250 250

Injection quantity adjustment_02

Adjusting point B

Rack position 7.7+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 9.6 8.1 11.1

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 750 750 750

Rack position 9.7

Boost pressure kPa 9.3 6.6 12

Boost pressure mmHg 70 50 90

Boost compensator adjustment_02

Pump speed r/min 750 750 750

Rack position 10.7

Boost pressure kPa 20 20 20

Boost pressure mmHg 150 150 150

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting (4)Boost compensator stroke (5)Rack difference between N = N1 and N = N2 (6)Rack difference between N = N3 and N = N4
----------
K=10 N1=1175r/min N2=350r/min N3=1175r/min N4=800r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=7deg+-5deg b=23deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Set the stopper bolt at speed = aa and rack position = bb.
----------
aa=0r/min bb=1-0.2mm
----------
a=42.5deg+-5deg b=(55deg)