101605-3431 ZEXEL 9 400 615 340 BOSCH INJECTION-PUMP ASSEMBLY 9400615340 1016053431 6138721151

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-3431 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 340 9400615340

ZEXEL 101605-3431 1016053431

KOMATSU 6138721151 6138721151

Service parts 101605-3431 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-4370

3. GOVERNOR 105411-1370

4. SUPPLY PUMP 105210-4690

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0870

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6180

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 24.5(250)

13. NOZZLE-HOLDER 105031-4480

14. NOZZLE

105015-5810

15. NOZZLE SET

Include in #1:

101401-4570 as _

101605-3431 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 340 9400615340

ZEXEL 101605-3431 1016053431

KOMATSU 6138721151 6138721151

Zexel num

Bosch num

Firm num

Name

101605-3431

9 400 615 340

6138721151 KOMATSU

INJECTION-PUMP ASSEMBLY
S6D110 * K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4 3.95 4.05

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 77 76 78

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 40 40

Boost pressure mmHg 300 300

Injection quantity adjustment_02

Adjusting point B

Rack position 7.4+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 12.4 11.2 13.6

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position 11.1

Boost pressure kPa 13.3 9.3 17.3

Boost pressure mmHg 100 70 130

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position 11.6

Boost pressure kPa 26.7 26.7 26.7

Boost pressure mmHg 200 200 200

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Boost compensator stroke (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=14 N1=1100r/min N2=750r/min N3=1100r/min N4=400r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=7deg+-5deg b=24deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)At shipping (2)Set the stopper bolt at speed = aa and rack position = bb.
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=(55deg)