101605-3170 ZEXEL 9 400 615 330 BOSCH INJECTION-PUMP ASSEMBLY 9400615330 1016053170 6136721150


101605-3170 INJECTION-PUMP ASSEMBLY
Rating:
11
Buy INJECTION-PUMP ASSEMBLY 101605-3170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 330 9400615330
ZEXEL 101605-3170 1016053170
KOMATSU 6136721150 6136721150

Service parts 101605-3170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-4020
3. GOVERNOR 105410-7890
4. SUPPLY PUMP 105210-4570
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0371
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5870
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 22.1(225)
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5470
15. NOZZLE SET

Include in #1:

101605-3170 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 615 330 9400615330
ZEXEL 101605-3170 1016053170
KOMATSU 6136721150 6136721150


Zexel num
Bosch num
Firm num
Name
101605-3170 
101605-3210 
9 400 615 330 
6136721150  KOMATSU
INJECTION-PUMP ASSEMBLY
6D105 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.2
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   49.8 48.8 50.8
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   57.3 55.3 59.3
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   9.5 8.5 10.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101605-3170
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=10
----------

Speed control lever angle

Test data 101605-3170
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=8deg+-5deg b=20deg+-5deg

Stop lever angle

Test data 101605-3170
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=46deg+-5deg b=53deg+-5deg




Have questions with 101605-3170?





Group cross 101605-3170 ZEXEL

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 610 211 
6138721440 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 615 328 
6136721330 
INJECTION-PUMP ASSEMBLY
6D105
9 400 610 167 
6137721120 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721860 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 610 212 
6137721660 
INJECTION-PUMP ASSEMBLY
S6D105
 
6138721870 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 329 
6138721880 
INJECTION-PUMP ASSEMBLY
SA6D110
101605-3170  

101605-3210 
9 400 615 330 
6136721150 
INJECTION-PUMP ASSEMBLY
6D105
9 400 611 831 
6136721160 
INJECTION-PUMP ASSEMBLY
6D105
 
 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721360 
INJECTION-PUMP ASSEMBLY
S6D105
Back to top