101605-0310 ZEXEL 9 400 613 178 BOSCH INJECTION-PUMP ASSEMBLY 9400613178 1016050310 1156034900


101605-0310 INJECTION-PUMP ASSEMBLY
Rating:
55
Buy INJECTION-PUMP ASSEMBLY 101605-0310 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 178 9400613178
ZEXEL 101605-0310 1016050310
ISUZU 1156034900 1156034900

Service parts 101605-0310 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8410
3. GOVERNOR 105411-2630
4. SUPPLY PUMP 105220-7230
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156643-1720
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-8341
11. Nozzle and Holder 1-15300-432-1
12. Open Pre:MPa(Kqf/cm2) 16.7{170}/19.6{200}
13. NOZZLE-HOLDER 105041-4410
14. NOZZLE
15. NOZZLE SET 105019-2900

Include in #1:

101605-0310 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 178 9400613178
ZEXEL 101605-0310 1016050310
ISUZU 1156034900 1156034900


Zexel num
Bosch num
Firm num
Name
101605-0310 
9 400 613 178 
1156034900  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.2 4.15 4.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.4
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   91 89.5 92.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   85.3 85.3
Boost pressure mmHg   640 640
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.8+-0.5
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   12 10.7 13.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   10.6++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 70 80
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   550 550 550
Rack position   R1-0.85
Boost pressure kPa   28 24 32
Boost pressure mmHg   210 180 240
Boost compensator adjustment_02
Pump speed r/min   550 550 550
Rack position   R1(10.4)
Boost pressure kPa   72 65.3 78.7
Boost pressure mmHg   540 490 590

Test data Ex:

Governor adjustment

Test data 101605-0310
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke: BCL
----------
K=13 BCL=0.85+-0.1mm
----------

Speed control lever angle

Test data 101605-0310
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=9deg+-5deg b=21deg+-5deg

Stop lever angle

Test data 101605-0310
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=32deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101605-0310
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101605-0310
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=9deg
----------
a=(100deg)




Have questions with 101605-0310?





Group cross 101605-0310 ZEXEL

Isuzu 

9 400 613 257 
1156034860 
INJECTION-PUMP ASSEMBLY
6BG1-T
101605-0310  
9 400 613 178 
1156034900 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 613 292 
1156034930 
INJECTION-PUMP ASSEMBLY
6BG1-T
F 019 Z20 417 
1156034931 
INJECTION-PUMP ASSEMBLY
6BG1-TRB-
F 019 Z20 417 
1156034932 
INJECTION-PUMP ASSEMBLY
6BG1-TRB-
 
1156034933 
INJECTION-PUMP ASSEMBLY
6BG1TRB05
9 400 613 436 
1156034980 
INJECTION-PUMP ASSEMBLY
6BG1-T
F 019 Z10 983 
1156034981 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 613 437 
1156035040 
INJECTION-PUMP ASSEMBLY
6BG1-T
F 019 Z10 984 
1156035041 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 613 500 
1156035050 
INJECTION-PUMP ASSEMBLY
6BG1
F 019 Z10 985 
1156035090 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 615 323 
1156035070 
INJECTION-PUMP ASSEMBLY
6BG1-T
 
1156035160 
INJECTION-PUMP ASSEMBLY
6BG1QM
Back to top