101605-0050 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016050050


101605-0050 INJECTION-PUMP ASSEMBLY
Rating:
21
Buy INJECTION-PUMP ASSEMBLY 101605-0050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101605-0050 1016050050

Cross reference number

ZEXEL 101605-0050 1016050050


Zexel num
Bosch num
Firm num
Name
101605-0050 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.3
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   71 69.5 72.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7+-0.5
Pump speed r/min   365 365 365
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   9.5++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 100 110
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101605-0050
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=18
----------

Speed control lever angle

Test data 101605-0050
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=13deg+-5deg b=24deg+-5deg

Stop lever angle

Test data 101605-0050
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101605-0050
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(100deg)




Have questions with 101605-0050?





Group cross 101605-0050 ZEXEL

Isuzu 

9 400 611 789 
1156033521 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 611 830 
1156033531 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 612 418 
1156033830 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 612 419 
1156033840 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156033880 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 615 317 
1156033881 
INJECTION-PUMP ASSEMBLY
6BG1-T
101605-0050  
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 615 318 
1156032750 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 612 785 
1156033920 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 615 319 
1156033930 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156033861 
INJECTION-PUMP ASSEMBLY
6BG1
F 019 Z10 728 
1156033862 
INJECTION-PUMP ASSEMBLY
6BG1
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 613 169 
1156033863 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 612 304 
1156033950 
INJECTION-PUMP ASSEMBLY
6BG1-T
Back to top