101603-8593 ZEXEL 9 400 611 747 BOSCH INJECTION-PUMP ASSEMBLY 9400611747 1016038593 8943959193

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101603-8593 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 747 9400611747

ZEXEL 101603-8593 1016038593

ISUZU 8943959193 8943959193

Service parts 101603-8593 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-6670

3. GOVERNOR 105932-1092

4. SUPPLY PUMP 105210-5110

5. AUTOM. ADVANCE MECHANIS 105643-0860

6. COUPLING PLATE 105661-1170

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6092

11. Nozzle and Holder 8-94395-923-2

12. Open Pre:MPa(Kqf/cm2) 22.1{225}

13. NOZZLE-HOLDER 105048-3862

14. NOZZLE 105017-1900

15. NOZZLE SET

Include in #1:

101603-8593 as INJECTION-PUMP ASSEMBLY

Include in #2:

104741-5300 as _

Cross reference number

BOSCH 9 400 611 747 9400611747

ZEXEL 101603-8593 1016038593

ISUZU 8943959193 8943959193

Zexel num

Bosch num

Firm num

Name

101603-8593

9 400 611 747

8943959193 ISUZU

INJECTION-PUMP ASSEMBLY
6HE1TC-S K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.5 3.45 3.55

Rack position
Point A R=A

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.2

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 98 96.4 99.6

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.3+-0.5

Pump speed r/min 265 265 265

Average injection quantity mm3/st. 10.5 9.2 11.8

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.2)

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 98 97 99

Basic *

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_04

Adjusting point B

Rack position (R1-0.2)

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 101 97.8 104.2

Fixing the lever *

Boost pressure kPa 70.6 70.6

Boost pressure mmHg 530 530

Injection quantity adjustment_05

Adjusting point C

Rack position (R1-1.85 )

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 57.5 54.3 60.7

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_06

Adjusting point I

Rack position -

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 105 105 137

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 1050 1050 1050

Rack position R2-1.85

Boost pressure kPa 9.3 8 10.6

Boost pressure mmHg 70 60 80

Boost compensator adjustment_02

Pump speed r/min 1050 1050 1050

Rack position R2(R1-0. 05)

Boost pressure kPa 57.3 57.3 57.3

Boost pressure mmHg 430 430 430

Timer adjustment

Pump speed r/min 1175--

Advance angle deg. 0 0 0

Load 3/4

Remarks
Start

Timer adjustment_02

Pump speed r/min 1125

Advance angle deg. 0.3

Load 3/4

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 3.5 3 4

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL (4)Adjust so that the boost compensator pushrod protrusion R = Ra at 0 boost.
----------
T1=L05 BCL=1.85+-0.1mm Ra=12+-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the pin at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=17deg+-5deg b=28deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=45mm
----------
a=12.5deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=9deg
----------
a=(150deg)