101603-7000 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016037000 1156024850

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101603-7000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-7000 1016037000

ISUZU 1156024850 1156024850

Cross reference number

ZEXEL 101603-7000 1016037000

ISUZU 1156024850 1156024850

Zexel num

Bosch num

Firm num

Name

101603-7000
101603-7002

1156024850 ISUZU

INJECTION-PUMP ASSEMBLY
6BG1-TC *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.6 3.55 3.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 14.2

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 101.4 99.8 103

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 8 6.7 9.3

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(14.2)

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 101.4 100.4 102.4

Basic *

Fixing the lever *

Boost pressure kPa 20 20

Boost pressure mmHg 150 150

Injection quantity adjustment_04

Adjusting point B

Rack position R1-0.7

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 92.8 89.6 96

Fixing the lever *

Boost pressure kPa 20 20

Boost pressure mmHg 150 150

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-0. 3)

Pump speed r/min 550 550 550

Average injection quantity mm3/st. 88.6 85.4 91.8

Fixing the lever *

Boost pressure kPa 20 20

Boost pressure mmHg 150 150

Injection quantity adjustment_06

Adjusting point D

Rack position R2-1.6

Pump speed r/min 550 550 550

Average injection quantity mm3/st. 49 45.8 52.2

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_07

Adjusting point I

Rack position -

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 90 90 98

Fixing the lever *

Rack limit *

Boost compensator adjustment

Pump speed r/min 550 550 550

Rack position R2-1.6

Boost pressure kPa 2 2 4.7

Boost pressure mmHg 15 15 35

Boost compensator adjustment_02

Pump speed r/min 550 550 550

Rack position R2-0.95

Boost pressure kPa 4.7 4.7 7.4

Boost pressure mmHg 35 35 55

Boost compensator adjustment_03

Pump speed r/min 550 550 550

Rack position R2(R1-0. 3)

Boost pressure kPa 13.3 13.3 13.3

Boost pressure mmHg 100 100 100

Timer adjustment

Pump speed r/min 1325--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1275

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 1 0.5 1.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT (3)Boost compensator stroke: BCL
----------
T1=C89 BCL=1.6+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=43deg+-5deg b=42deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(60deg)