101603-6960 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016036960 me070359


101603-6960 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 101603-6960 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-6960 1016036960
MITSUBISHI ME070359 me070359

Service parts 101603-6960 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-9510
3. GOVERNOR 105410-8770
4. SUPPLY PUMP 105210-4640
5. AUTOM. ADVANCE MECHANIS 105624-5160
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5261
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105030-4990
14. NOZZLE 105015-4860
15. NOZZLE SET

Include in #1:

101603-6960 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101603-6960 1016036960
MITSUBISHI ME070359 me070359


Zexel num
Bosch num
Firm num
Name
101603-6960 
101602-1130 
 
ME070359  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D14CT * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-3720
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   80.3 79.3 81.3
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.6+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   9.7 8.2 11.2
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   650--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   600
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-6960
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Delivered with idle spring not operating. (3)Set idle sub-spring (4)Main spring setting (5)At shipping
----------
K=10
----------

Speed control lever angle

Test data 101603-6960
F:Full speed I:Idle (1)At shipping (2)Stopper bolt setting
----------

----------
a=16deg+-5deg b=(2deg) c=6deg+-5deg

Stop lever angle

Test data 101603-6960
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=50deg+-5deg b=53deg+-5deg

Timing setting

Test data 101603-6960
(1)Pump vertical direction (2)Position of gear mark 'Z' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(90deg)




Have questions with 101603-6960?





Group cross 101603-6960 ZEXEL

Mitsubishi 

9 400 615 147 
ME047303 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
6D15
 
 
INJECTION-PUMP ASSEMBLY
6D15
9 400 615 148 
ME035548 
INJECTION-PUMP ASSEMBLY
6D15
 
ME050821 
INJECTION-PUMP ASSEMBLY
6D22
9 400 615 149 
ME086500 
INJECTION-PUMP ASSEMBLY
6D31
9 400 615 150 
ME047302 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 151 
ME047369 
INJECTION-PUMP ASSEMBLY
6D16T
101603-6960  

101602-1130 
 
ME070359 
INJECTION-PUMP ASSEMBLY
6D14CT
 
ME070290 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 615 152 
ME047305 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 615 153 
ME047304 
INJECTION-PUMP ASSEMBLY
6D16
Back to top