101603-6521 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016036521


101603-6521 INJECTION-PUMP ASSEMBLY
Rating:
81
Buy INJECTION-PUMP ASSEMBLY 101603-6521 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-6521 1016036521

Service parts 101603-6521 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-9680
3. GOVERNOR 105931-3310
4. SUPPLY PUMP 105210-4641
5. AUTOM. ADVANCE MECHANIS 105643-0220
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5980
11. Nozzle and Holder ME035749
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3900
14. NOZZLE 105015-5660
15. NOZZLE SET

Include in #1:

101603-6521 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101603-6521 1016036521


Zexel num
Bosch num
Firm num
Name
101603-6521 
101603-6522 
 
  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D14T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.1
Pump speed r/min   800 800 800
Each cylinder's injection qty mm3/st.   88 85.4 90.6
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Each cylinder's injection qty mm3/st.   10.5 9 12
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.1)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   88 87 89
Basic   *
Fixing the lever   *
Boost pressure kPa   49.3 49.3
Boost pressure mmHg   370 370
Injection quantity adjustment_04
Adjusting point   C
Rack position   (R1-0.8)
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   67 65 69
Fixing the lever   *
Boost pressure kPa   18.7 18.7 18.7
Boost pressure mmHg   140 140 140
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   110 90 130
Fixing the lever   *
Rack limit   *
Boost compensator adjustment
Pump speed r/min   700 700 700
Rack position   R1-1.1
Boost pressure kPa   13.3 13.3 13.3
Boost pressure mmHg   100 100 100
Boost compensator adjustment_02
Pump speed r/min   700 700 700
Rack position   (R1-0.8)
Boost pressure kPa   18.7 17.4 20
Boost pressure mmHg   140 130 150
Boost compensator adjustment_03
Pump speed r/min   700 700 700
Rack position   R1(12.1)
Boost pressure kPa   36 29.3 42.7
Boost pressure mmHg   270 220 320
Timer adjustment
Pump speed r/min   1250--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1300
Advance angle deg.   1.6 1.1 2.1
Timer adjustment_04
Pump speed r/min   1400
Advance angle deg.   3.5 3 4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-6521
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT (3)Boost compensator stroke: BCL
----------
T1=B44 BCL=1.1+-0.1mm
----------

Speed control lever angle

Test data 101603-6521
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=33deg+-5deg b=(41deg)+-3deg

Stop lever angle

Test data 101603-6521
N:Pump normal S:Stop the pump. (1)Free (at shipping) (2)R = corresponding to aa (3)Set the stopper bolt at speed = rated point and rack position = bb. Confirm non-injection. (4)After setting the stopper bolt, confirm non-injection at speed = cc and rack position = dd.
----------
aa=17.4mm bb=(7.5)mm cc=275r/min dd=(9)mm
----------
a=17deg+-5deg b=(27deg) c=2deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=400+-5r/min Ra=9.2mm
----------

Timing setting

Test data 101603-6521
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=15deg
----------
a=(0deg)




Have questions with 101603-6521?





Group cross 101603-6521 ZEXEL

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
6D15
 
ME035529 
INJECTION-PUMP ASSEMBLY
6D15
 
ME056529 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D14T
101603-6521  

101603-6522 
 
 
INJECTION-PUMP ASSEMBLY
6D14T
 
ME035540 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 615 130 
ME070160 
INJECTION-PUMP ASSEMBLY
6D14T
 
 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 615 131 
ME035525 
INJECTION-PUMP ASSEMBLY
6D14T
 
 
INJECTION-PUMP ASSEMBLY
6D14T
9 400 615 132 
ME035526 
INJECTION-PUMP ASSEMBLY
6D14T
 
ME056516 
INJECTION-PUMP ASSEMBLY
6D22
9 400 615 133 
ME047238 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 134 
ME047081 
INJECTION-PUMP ASSEMBLY
6D16
9 400 610 651 
ME059764 
INJECTION-PUMP ASSEMBLY
6D22
Back to top