101603-4410 ZEXEL 9 400 619 798 BOSCH INJECTION-PUMP ASSEMBLY 9400619798 1016034410 1156022382


101603-4410 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101603-4410 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 798 9400619798
ZEXEL 101603-4410 1016034410
ISUZU 1156022382 1156022382

Service parts 101603-4410 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2120
3. GOVERNOR 105931-4300
4. SUPPLY PUMP 105220-4781
5. AUTOM. ADVANCE MECHANIS 105612-3250
6. COUPLING PLATE 105661-0661
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5053
11. Nozzle and Holder 1-15300-105-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105015-4190
15. NOZZLE SET

Include in #1:

101603-4410 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 798 9400619798
ZEXEL 101603-4410 1016034410
ISUZU 1156022382 1156022382


Zexel num
Bosch num
Firm num
Name
101603-4410 
101603-4411 
9 400 619 798 
1156022382  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   68.6 67 70.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   290 290 290
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.5)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   68.6 67.6 69.6
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.1
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   70.1 66.9 73.3
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.25
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   41.4 38.2 44.6
Fixing the lever   *
Timer adjustment
Pump speed r/min   1050--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   (1300)
Advance angle deg.   1 0.5 1.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-4410
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT: RAL
----------
T1=B51 RAL=13.5+0.2mm
----------

Speed control lever angle

Test data 101603-4410
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=40deg+-5deg b=33deg+-3deg

Stop lever angle

Test data 101603-4410
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

0000001501 ACS

Test data 101603-4410
(A) Set screw (B) Push rod 1 (C) Push rod 2 (D) Cover 1. Aneroid compensator unit adjustment (1)Select the push rod 2 to obtain L2. (2)Screw in (A) to obtain L1. 2. Adjustment when mounting the governor. (1)Set the speed of the pump to N1 r/min and fix the control lever at the full set position. (2)Screw in the aneroid compensator to obtain the performance shown in the graph above. (3)As there is hysterisis, measure when the absolute pressure drops. (4)Hysterisis must not exceed rack position = h1.
----------
N1=1000r/min L1=(1.5)mm L2=11+-0.5mm h1=0.15mm
----------
Ra=R1(10.5)mm Rb=R1-0.5mm Pa=89.8+-2.7kPa(674+-20mmHg) Pb=70.1+-0.7kPa(526+-5mmHg) Q1=68.6+-1cm3/1000st Q2=55.2+-1.6cm3/1000st

Timing setting

Test data 101603-4410
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(60deg)




Have questions with 101603-4410?





Group cross 101603-4410 ZEXEL

Isuzu 

 
1156022362 
INJECTION-PUMP ASSEMBLY
6BD1-T
9 400 610 649 
1156022364 
INJECTION-PUMP ASSEMBLY
6BD1-T
101603-4410  

101603-4411 
9 400 619 798 
1156022382 
INJECTION-PUMP ASSEMBLY
6BD1T
9 400 610 650 
1156022384 
INJECTION-PUMP ASSEMBLY
6BD1-T
 
1156018882 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156018892 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156018902 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 615 082 
1156018904 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156018910 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 619 551 
1156022212 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 615 083 
1156022214 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156021962 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 615 084 
1156021964 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156022660 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156022670 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156022671 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156022672 
INJECTION-PUMP ASSEMBLY
6BG1TC
9 400 615 085 
1156022673 
INJECTION-PUMP ASSEMBLY
6BG1-TC
Back to top