101603-0305 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016030305 1156017948


101603-0305 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 101603-0305 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-0305 1016030305
ISUZU 1156017948 1156017948

Service parts 101603-0305 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2830
3. GOVERNOR 105931-4651
4. SUPPLY PUMP 105220-5220
5. AUTOM. ADVANCE MECHANIS 105644-0290
6. COUPLING PLATE 105661-0730
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5023
11. Nozzle and Holder 1-15300-106-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-3201
14. NOZZLE 105015-4630
15. NOZZLE SET

Include in #1:

101603-0305 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101603-0305 1016030305
ISUZU 1156017948 1156017948


Zexel num
Bosch num
Firm num
Name
101603-0305 
101603-0306 
 
1156017948  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1TC * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   14
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   100.8 99.2 102.4
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.7+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(14)
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   100.8 99.8 101.8
Basic   *
Fixing the lever   *
Boost pressure kPa   24 24
Boost pressure mmHg   180 180
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.65
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   93.5 90.3 96.7
Fixing the lever   *
Boost pressure kPa   24 24
Boost pressure mmHg   180 180
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.3
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   88.8 85.6 92
Fixing the lever   *
Boost pressure kPa   24 24
Boost pressure mmHg   180 180
Injection quantity adjustment_06
Adjusting point   D
Rack position   R1-1.7
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   53.6 50.4 56.8
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_07
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   92 92 100
Fixing the lever   *
Rack limit   *
Boost compensator adjustment
Pump speed r/min   550 550 550
Rack position   (R1-0.3) -1.4
Boost pressure kPa   2 2 4.7
Boost pressure mmHg   15 15 35
Boost compensator adjustment_02
Pump speed r/min   550 550 550
Rack position   (R1-0.3) -0.85
Boost pressure kPa   4.7 4.7 7.4
Boost pressure mmHg   35 35 55
Boost compensator adjustment_03
Pump speed r/min   550 550 550
Rack position   R1-0.3
Boost pressure kPa   10.7 10.7 10.7
Boost pressure mmHg   80 80 80
Timer adjustment
Pump speed r/min   1325--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1275
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   1 0.5 1.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-0305
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT (3)Boost compensator stroke: BCL
----------
T1=C71 BCL=1.4+-0.1mm
----------

Speed control lever angle

Test data 101603-0305
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=43deg+-5deg b=41.5deg+-3deg

Stop lever angle

Test data 101603-0305
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

Test data 101603-0305
(1)Pump vertical direction (2)Position of timer's threaded hole at the No. 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(60deg)




Have questions with 101603-0305?





Group cross 101603-0305 ZEXEL

Isuzu 

 
1156017941 
INJECTION-PUMP ASSEMBLY
6BG1-TC
 
1156017942 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017943 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017944 
INJECTION-PUMP ASSEMBLY
6BG1TC
 
1156017945 
INJECTION-PUMP ASSEMBLY
6BG1TC
101603-0305  

101603-0306 
 
1156017948 
INJECTION-PUMP ASSEMBLY
6BG1TC
9 400 614 998 
1156017949 
INJECTION-PUMP ASSEMBLY
6BG1-TC
Back to top