101602-9751 ZEXEL 9 400 611 254 BOSCH INJECTION-PUMP ASSEMBLY 9400611254 1016029751 1671295003


101602-9751 INJECTION-PUMP ASSEMBLY
Rating:
53
Buy INJECTION-PUMP ASSEMBLY 101602-9751 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 254 9400611254
ZEXEL 101602-9751 1016029751
NISSAN-DIESEL 1671295003 1671295003

Service parts 101602-9751 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3690
3. GOVERNOR 105400-5201
4. SUPPLY PUMP 105220-7050
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0601
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5620
11. Nozzle and Holder 16600-95015
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4620
14. NOZZLE 105015-7360
15. NOZZLE SET

Include in #1:

101602-9751 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 611 254 9400611254
ZEXEL 101602-9751 1016029751
NISSAN-DIESEL 1671295003 1671295003


Zexel num
Bosch num
Firm num
Name
101602-9751 
9 400 611 254 
1671295003  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
NE6T05 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.75 2.7 2.8
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.4
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   99 97.5 100.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.7+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   9 7.5 10.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-9751
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)RACK LIMIT: RAL (6)Rack difference between N = N1 and N = N2
----------
K=10 RAL=11+-0.1mm N1=750r/min N2=450r/min
----------

Speed control lever angle

Test data 101602-9751
F:Full speed I:Idle (1)Set the pump speed at aa (2)Stopper bolt setting (3)Stopper bolt setting (4)Set the pump speed at bb.
----------
aa=905r/min bb=755r/min
----------
a=(2deg)+-5deg b=(20deg)+-5deg c=(7deg)+-5deg

Stop lever angle

Test data 101602-9751
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101602-9751
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=- r1=750r/min r2=- Q1=99+-1.5mm3/st Q2=- c1=+-2.5% c2=- a3=18 a4=15 r3=900r/min r4=750r/min

Timing setting

Test data 101602-9751
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(30deg)




Have questions with 101602-9751?





Group cross 101602-9751 ZEXEL

Yanmar 

 
12765651010 
INJECTION-PUMP ASSEMBLY
6CHL
9 400 614 980 
12765651011 
INJECTION-PUMP ASSEMBLY
6CHL

Nissan-Diesel 

 
16790Z5571 
INJECTION-PUMP ASSEMBLY
FD6T
 
1679095009 
INJECTION-PUMP ASSEMBLY
NE6T
9 400 614 981 
 
INJECTION-PUMP ASSEMBLY
6D22

Nissan-Diesel 

 
1679095010 
INJECTION-PUMP ASSEMBLY
NE6T
 
1671295000 
INJECTION-PUMP ASSEMBLY
NE6T05
101602-9751  
9 400 611 254 
1671295003 
INJECTION-PUMP ASSEMBLY
NE6T05

Mitsubishi-Heav 

 
3436100020 
INJECTION-PUMP ASSEMBLY
S6KT
 
3436100021 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 619 598 
3436100022 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 614 982 
3436100023 
INJECTION-PUMP ASSEMBLY
S6K-T

Nissan-Diesel 

9 400 619 683 
 
INJECTION-PUMP ASSEMBLY
NE6T
9 400 614 983 
1679095011 
INJECTION-PUMP ASSEMBLY
NE6T
9 400 614 984 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

 
1679095012 
INJECTION-PUMP ASSEMBLY
NE6T
Back to top