101602-8570 ZEXEL 9 400 614 946 BOSCH INJECTION-PUMP ASSEMBLY 9400614946 1016028570 1156032830


101602-8570 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 101602-8570 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 946 9400614946
ZEXEL 101602-8570 1016028570
ISUZU 1156032830 1156032830

Service parts 101602-8570 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8050
3. GOVERNOR 105419-3090
4. SUPPLY PUMP 105220-6300
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156639-0520
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6682
11. Nozzle and Holder 1-15300-291-2
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4361
14. NOZZLE 105015-4740
15. NOZZLE SET

Include in #1:

101602-8570 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 614 946 9400614946
ZEXEL 101602-8570 1016028570
ISUZU 1156032830 1156032830


Zexel num
Bosch num
Firm num
Name
101602-8570 
101602-8660 
9 400 614 946 
1156032830  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.4
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   48 46.5 49.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7+-0.5
Pump speed r/min   370 370 370
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   100 95 105
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101602-8570
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=8
----------

Speed control lever angle

Test data 101602-8570
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=5deg+-5deg b=17deg+-5deg

Stop lever angle

Test data 101602-8570
N:Pump normal S:Stop the pump.
----------

----------
a=4.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101602-8570
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(90deg)




Have questions with 101602-8570?





Group cross 101602-8570 ZEXEL

Isuzu 

9 400 614 940 
1156032600 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 941 
1156032610 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 942 
1156032780 
INJECTION-PUMP ASSEMBLY
6BG1QF
F 019 Z10 727 
 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 943 
1156032800 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156032810 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 944 
1156032811 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 945 
1156032820 
INJECTION-PUMP ASSEMBLY
6BG1
101602-8570  

101602-8660 
9 400 614 946 
1156032830 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 947 
1156032840 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 948 
1156032880 
INJECTION-PUMP ASSEMBLY
6BG1
Back to top