101602-8550 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016028550 1156032810


101602-8550 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 101602-8550 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-8550 1016028550
ISUZU 1156032810 1156032810

Cross reference number

ZEXEL 101602-8550 1016028550
ISUZU 1156032810 1156032810


Zexel num
Bosch num
Firm num
Name
101602-8550 
101602-8551 
 
1156032810  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1-T * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.7
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   77 75.5 78.5
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7.8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10.5 9.2 11.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-8550
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=16 RAL=11.5+-0.1mm N1=1100r/min N2=800r/min
----------

Speed control lever angle

Test data 101602-8550
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=12deg+-5deg b=23deg+-5deg

Stop lever angle

Test data 101602-8550
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101602-8550
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(100deg)




Have questions with 101602-8550?





Group cross 101602-8550 ZEXEL

Isuzu 

9 400 614 940 
1156032600 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 941 
1156032610 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 942 
1156032780 
INJECTION-PUMP ASSEMBLY
6BG1QF
F 019 Z10 727 
 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 943 
1156032800 
INJECTION-PUMP ASSEMBLY
6BG1
101602-8550  

101602-8551 
 
1156032810 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 944 
1156032811 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 945 
1156032820 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 946 
1156032830 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 947 
1156032840 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 948 
1156032880 
INJECTION-PUMP ASSEMBLY
6BG1
Back to top